EUVIMEDEUVIMED entdecken
Crossref

Operational diagnosis of spatial vibration response in a frame-based self-built CNC milling machine using spectral analysis

Viet-Hung Pham, Ngoc-Duong Nguyen, Hoa-Cuc Nguyen, Bich-Ngoc Mach, Thanh Q. Nguyen

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science · 30.10.2026

DOI: 10.1177/09544062261497758 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, online erschienen am 30.10.2026. Verfasst von Viet-Hung Pham und 4 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study reports a multi-location, tri-axial vibration assessment of a frame-based self-built CNC milling machine using measured time histories and power spectral density (PSD) plots. Responses were compared at the spindle-support, frame, worktable, and base/support regions while preserving the machine-axis directions. The reported spectra contain recurring low-to-mid-frequency components near 5–10, 9–18, 22–24, and 35–40 Hz; because the first two intervals overlap and the raw records are unavailable in the supplied scientific record, these intervals are treated as descriptive spectral clusters rather than independent analysis bands. The spindle-support measurements show the largest plotted peak amplitudes in the x and z comparisons, whereas the spatial rankings differ by axis. These observations are consistent with direction-dependent structural compliance, but they do not by themselves identify a unique excitation source or causal transmission path. The study therefore provides an evidence-constrained case assessment and identifies the acquisition metadata, repeated-run statistics and synchronized measurements required for a quantitative transmission analysis.

Zitieren

APA

Pham, V., Nguyen, N., Nguyen, H., Mach, B., & Nguyen, T. Q. (2026). Operational diagnosis of spatial vibration response in a frame-based self-built CNC milling machine using spectral analysis. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. https://doi.org/10.1177/09544062261497758

Vancouver

Pham V, Nguyen N, Nguyen H, Mach B, Nguyen TQ. Operational diagnosis of spatial vibration response in a frame-based self-built CNC milling machine using spectral analysis. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2026. doi:10.1177/09544062261497758

BibTeX
@article{Pham2026,
  author = {Pham, Viet-Hung and Nguyen, Ngoc-Duong and Nguyen, Hoa-Cuc and Mach, Bich-Ngoc and Nguyen, Thanh Q.},
  title = {Operational diagnosis of spatial vibration response in a frame-based self-built CNC milling machine using spectral analysis},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science},
  year = {2026},
  doi = {10.1177/09544062261497758}
}
Kostenlos starten →