EUVIMEDEUVIMED entdecken
Crossref

Multi-objective micro-geometry optimization of planetary gear reducers based on static-dynamic analysis and experimental validation

Ting Gao, Weiwei Liu, Xuehui Chen, Hao Li, Congmin Li, Wei Liu

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science · 2026-09 · 240 (18) · 7280-7297

DOI: 10.1177/09544062261449296 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, online erschienen am 28.05.2026. Verfasst von Ting Gao und 5 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Gefördert von: the Key Research and Development Program of Fuyang City, the Open Fund Project of Anhui Provincial Key Laboratory of Critical Friction Pair for High-end Equipment, the Cultivation Project for Young and Middle-aged Academi Leaders of Anhui Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Partial loading and surface wear induced by elastic deformation and machining errors are critical factors causing vibration and noise in planetary gear trains. To mitigate these issues, this paper proposes a multi-objective optimization method for gear tooth modification. Based on a comprehensive analysis of the static and dynamic characteristics of a two-stage planetary gear set, a multi-objective function is established to minimize transmission error, meshing force, unit normal load, and tooth root bending stress. A hybrid optimization strategy, integrating a combined weighting method with a Genetic Algorithm (GA), is employed to determine the optimal micro-geometry parameters. Verification is conducted through static-dynamic simulations and prototype experiments. The results demonstrate that transmission error decreases by 18.91% (from 0.37 to 0.30 μ m) after optimization. The meshing force decreases from 65.9 to 56.6 N (13.85%), the unit normal load decreases from 95.4 to 83.5 N/mm (12.47%), and the tooth root bending stress decreases from 270.3 to 220.8 MPa (18.30%). In addition, the peak vibration acceleration is reduced from 8.12 to 5.77 m/s 2 (28.94%), while the noise sound pressure level decreases from 70.2 to 64.8 dB(A) (7.69%). Optimized micro-geometry effectively ameliorates impact shocks during gear engagement and disengagement, thus enhancing transmission efficiency. This study provides a valuable reference for the low-noise design and vibration control of planetary gear reducers.

Förderung

  • the Key Research and Development Program of Fuyang City
  • the Open Fund Project of Anhui Provincial Key Laboratory of Critical Friction Pair for High-end Equipment
  • the Cultivation Project for Young and Middle-aged Academi Leaders of Anhui Province
  • the Outstanding Youth Research Project of Universities in Anhui Province

Zitieren

APA

Gao, T., Liu, W., Chen, X., Li, H., Li, C., & Liu, W. (2026). Multi-objective micro-geometry optimization of planetary gear reducers based on static-dynamic analysis and experimental validation. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 240(18), 7280-7297. https://doi.org/10.1177/09544062261449296

Vancouver

Gao T, Liu W, Chen X, Li H, Li C, Liu W. Multi-objective micro-geometry optimization of planetary gear reducers based on static-dynamic analysis and experimental validation. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2026;240(18):7280-7297. doi:10.1177/09544062261449296

BibTeX
@article{Gao2026,
  author = {Gao, Ting and Liu, Weiwei and Chen, Xuehui and Li, Hao and Li, Congmin and Liu, Wei},
  title = {Multi-objective micro-geometry optimization of planetary gear reducers based on static-dynamic analysis and experimental validation},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science},
  year = {2026},
  volume = {240},
  number = {18},
  pages = {7280--7297},
  doi = {10.1177/09544062261449296}
}
Kostenlos starten →