EUVIMEDEUVIMED entdecken
Crossref

Research on optimization design method of parallel flow channel structure for hydraulic cartridge valve blocks in additive manufacturing

Jia Chunqiang, Ma Wenyu, Zhang Chengshuai, Yao Dongliang

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science · 2026-08 · 240 (16) · 5853-5868

DOI: 10.1177/09544062261444245 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, online erschienen am 02.05.2026. Verfasst von Jia Chunqiang und 3 weiteren Autor:innen. Die Arbeit nennt 13 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study proposes an optimization design method for parallel flow channels in hydraulic cartridge valve blocks manufactured via additive manufacturing (AM), with the dual objectives of minimizing pressure loss and pipeline length. Based on the structural characteristics of parallel flow channels, optimization models for both direct and deviated configurations were developed. Using computational fluid dynamics (CFD) simulations, fitting equations relating structural parameters to pressure loss were established. A response particle swarm optimization (RPSO) algorithm was then applied to optimize the flow channel design, and the reliability of the optimization results was verified experimentally. The results indicate that, for direct-connected flow channels, pressure loss is minimized when the main flow axis is tangent to the valve chamber; under this condition, the volume of an 8 mm diameter flow channel was reduced by 25.84%, and the pressure loss decreased by 3.97%. For the optimized deviated flow channel, the volume was reduced by 8.4%, and the pressure loss decreased by 10.58%. This work provides an effective optimization approach for the design of parallel flow channels in additively manufactured hydraulic valve blocks, laying a foundation for further development and application of AM-based hydraulic systems.

Zitieren

APA

Chunqiang, J., Wenyu, M., Chengshuai, Z., & Dongliang, Y. (2026). Research on optimization design method of parallel flow channel structure for hydraulic cartridge valve blocks in additive manufacturing. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 240(16), 5853-5868. https://doi.org/10.1177/09544062261444245

Vancouver

Chunqiang J, Wenyu M, Chengshuai Z, Dongliang Y. Research on optimization design method of parallel flow channel structure for hydraulic cartridge valve blocks in additive manufacturing. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2026;240(16):5853-5868. doi:10.1177/09544062261444245

BibTeX
@article{Chunqiang2026,
  author = {Chunqiang, Jia and Wenyu, Ma and Chengshuai, Zhang and Dongliang, Yao},
  title = {Research on optimization design method of parallel flow channel structure for hydraulic cartridge valve blocks in additive manufacturing},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science},
  year = {2026},
  volume = {240},
  number = {16},
  pages = {5853--5868},
  doi = {10.1177/09544062261444245}
}
Kostenlos starten →