EUVIMEDEUVIMED entdecken
Crossref

Comparative analysis of adaptability of open TBM small curve turning radius

Du Lijie, Wang Xiaoyong, Deng Liying, Quan Yongwei, Zhao Xiangbo

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science · 2024-07 · 238 (14) · 6813-6830

DOI: 10.1177/09544062241228993 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, online erschienen am 11.02.2024. Verfasst von Du Lijie und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 20 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aiming at the problems of difficult operation and low excavation accuracy of open TBM in the process of small curve cornering, the structural mechanism, and motion characteristics of the traditional Horizontal main beam type TBM and the new 8-SPS V-type TBM mainframe were compared and studied. Based on the drainage channel project of a pumped storage power station, the factors affecting the minimum turning radius of TBM were analyzed by establishing two TBM main engine turning direction models. Secondly, the design of two open TBM mainframes with a diameter of ϕ3530 mm is improved. Finally, the relationship between the displacement and velocity change between the cutterhead and the propulsion cylinder under the straight-line boring condition and the small curve turning boring condition of TBM was analyzed by ADAMS software. The results show that when the tunnel design axis has a large turning radius and is dominated by straight segments, the TBM propulsion system with horizontal main beam type has higher excavation efficiency. The 8-SPS V-type TBM cutterhead attitude change is more flexible, which is more suitable for complex and changeable small curve corner boring. Moreover, the 8-SPS propulsion system is symmetrical, and the speed of each cylinder changes more gently during the turning process, the cylinder attitude of TBM is easy to control during the small curve turning and propulsion, the boring accuracy is higher, and the propulsion system compliance is better.

Zitieren

APA

Lijie, D., Xiaoyong, W., Liying, D., Yongwei, Q., & Xiangbo, Z. (2024). Comparative analysis of adaptability of open TBM small curve turning radius. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238(14), 6813-6830. https://doi.org/10.1177/09544062241228993

Vancouver

Lijie D, Xiaoyong W, Liying D, Yongwei Q, Xiangbo Z. Comparative analysis of adaptability of open TBM small curve turning radius. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2024;238(14):6813-6830. doi:10.1177/09544062241228993

BibTeX
@article{Lijie2024,
  author = {Lijie, Du and Xiaoyong, Wang and Liying, Deng and Yongwei, Quan and Xiangbo, Zhao},
  title = {Comparative analysis of adaptability of open TBM small curve turning radius},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science},
  year = {2024},
  volume = {238},
  number = {14},
  pages = {6813--6830},
  doi = {10.1177/09544062241228993}
}
Kostenlos starten →