EUVIMEDEUVIMED entdecken
Crossref

An experimental investigation of fracture toughness, mechanical properties and forming limit curves of Al composites

Mohammad Heydari Vini, Saeed Daneshmand

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science · 2024-04 · 238 (7) · 2831-2840

DOI: 10.1177/09544062231196010 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, online erschienen am 15.09.2023. Verfasst von Mohammad Heydari Vini und 1 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 31 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the present study, accumulative roll bonding is used to fabricate Al base composites with the thickness of 1 mm. then, fracture toughness, mechanical properties and forming limit diagrams (FLD) of them have been investigated versus ARB parameters experimentally. Boron nitride (BN) particles are used as reinforcements and Al/BN composites have been manufactured up to 10 accumulative rolling passes at 300°C. after the 10th pass, the strength of composite samples reached to 168 MPa registering 248% improvement than the initial AA1100 sample. Also, the bonding quality among the composite layers improved by increasing the number of passes. A uniform scattering of Boron nitride particles and bonding strength and quality was improved at higher number of passes. Moreover, the fracture mode at higher passes was observed as shear ductile that had been changed from deep dimples (for low number of passes). The area under the FLDs, dropped sharply after the first pass and then improved at higher passes, as the criterion of formability. Finally, fracture toughness enhanced to the maximum value of 30 MPam 1/2 for the composite samples fabricated with 10 passes.

Zitieren

APA

Vini, M. H., & Daneshmand, S. (2024). An experimental investigation of fracture toughness, mechanical properties and forming limit curves of Al composites. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238(7), 2831-2840. https://doi.org/10.1177/09544062231196010

Vancouver

Vini MH, Daneshmand S. An experimental investigation of fracture toughness, mechanical properties and forming limit curves of Al composites. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2024;238(7):2831-2840. doi:10.1177/09544062231196010

BibTeX
@article{Vini2024,
  author = {Vini, Mohammad Heydari and Daneshmand, Saeed},
  title = {An experimental investigation of fracture toughness, mechanical properties and forming limit curves of Al composites},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science},
  year = {2024},
  volume = {238},
  number = {7},
  pages = {2831--2840},
  doi = {10.1177/09544062231196010}
}
Kostenlos starten →