EUVIMEDEUVIMED entdecken
Crossref

Effect of fin configuration and orientation of latent heat storage system on the melting and solidification performance

Gopi Krishna Amudhalapalli, Jaya Krishna Devanuri

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science · 2024-03 · 238 (5) · 1747-1759

DOI: 10.1177/09544062231185498 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, online erschienen am 03.07.2023. Verfasst von Gopi Krishna Amudhalapalli und 1 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 40 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Phase change materials (PCMs) are used to store thermal energy. They possess high specific energy at nearly constant temperatures. The usage of the PCMs is limited due to their very low thermal conductivity, which results in poor heat transfer. To overcome this problem usage of fins is a potential technique. In the current analysis, the surface area of the heat transfer fluid (HTF) tube is increased by radial (R-type), spiral (S-type), and longitudinal (L-type) fins. A 3D numerical analysis of melting and solidification is carried out on R-type, S-type, and L-type shell and tube (S&T) PCM heat exchanger (HX) by considering the inclination effects. Lauric acid is used as PCM. Phase change time, energy ratio, and exergy efficiency are considered to analyze the performance of HXs. MOORA analysis is carried out to select the best HX. It is observed that R-type HX at the vertical position has shown better performance among the selected HXs. Among the considered geometries, the maximum average exergy efficiency is obtained for 45° inclination with R-type HX and minimum for horizontally positioned L-type HX during both melting and solidification. The charging time of the vertically positioned HX, when compared to 45 o oriented HX with R type, S type, and L type HX is observed to decrease by 47.5%, 45.7%, and 23%, respectively.

Zitieren

APA

Amudhalapalli, G. K., & Devanuri, J. K. (2024). Effect of fin configuration and orientation of latent heat storage system on the melting and solidification performance. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238(5), 1747-1759. https://doi.org/10.1177/09544062231185498

Vancouver

Amudhalapalli GK, Devanuri JK. Effect of fin configuration and orientation of latent heat storage system on the melting and solidification performance. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2024;238(5):1747-1759. doi:10.1177/09544062231185498

BibTeX
@article{Amudhalapalli2024,
  author = {Amudhalapalli, Gopi Krishna and Devanuri, Jaya Krishna},
  title = {Effect of fin configuration and orientation of latent heat storage system on the melting and solidification performance},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science},
  year = {2024},
  volume = {238},
  number = {5},
  pages = {1747--1759},
  doi = {10.1177/09544062231185498}
}
Kostenlos starten →