EUVIMEDEUVIMED entdecken
Crossref

Interaction mechanisms and grinding-force behavior in ultrasonic-assisted high-shear and low-pressure grinding of LN using ball-end body-armor-like abrasive tools

Zhiyin Wang, Yebing Tian, Shuangchen Zhao, Chengwei Wei, Kamal Kishore, Longjie Qin, Yukang Zhao

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · 01.08.2026

DOI: 10.1177/09544054261472397 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, online erschienen am 01.08.2026. Verfasst von Zhiyin Wang und 6 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Gefördert von: the National Natural Science Foundation of China, the Natural Science Foundation of Shandong Province, the Key Research and Development Project of the Ningxia Hui Autonomous Region.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lithium niobate crystals are typical soft-brittle optoelectronic materials widely used in optical modulation, communication, sensing, and precision optical devices. However, conventional grinding easily induces surface scratches, particle embedding, subsurface cracks, and severe processing damage, which restricts high-precision, low-damage manufacturing. To solve this problem, ultrasonic-assisted high-shear and low-pressure grinding (HSLPG) with ball-end body-armor-like abrasive tools (BAAT) was proposed. Considering the high-frequency, intermittent contact characteristics induced by ultrasonic vibration, the vector superposition of the ultrasonic tangential impact load and the normal external load was introduced. Based on ultrasonic vibration kinematics, elastohydrodynamic lubrication and Hertz contact theory, a theoretical grinding force prediction model for ultrasonic-assisted HSLPG was established. The spatial distribution characteristics of elastohydrodynamic pressure under different ultrasonic frequencies, amplitudes, normal loads and spindle rotational speeds were revealed, and the intrinsic regulation mechanism of process parameters on contact pressure and tangential grinding force was clarified. Single-factor grinding experiments on a lithium niobate crystal were conducted to verify the accuracy of the proposed model. The results show that the predicted grinding force values are in good agreement with the experimental values, with an average error of only 5.04%. Increasing the ultrasonic frequency and amplitude reduces the average tangential grinding force, whereas increasing the normal load and spindle speed significantly increases the grinding force. Compared the tangential grinding forces of conventional grinding and ultrasonic-assisted HSLPG.

Förderung

  • the National Natural Science Foundation of China
  • the Natural Science Foundation of Shandong Province
  • the Key Research and Development Project of the Ningxia Hui Autonomous Region
  • the Taishan Scholar Special Foundation of Shandong Province

Zitieren

APA

Wang, Z., Tian, Y., Zhao, S., Wei, C., Kishore, K., Qin, L., & Zhao, Y. (2026). Interaction mechanisms and grinding-force behavior in ultrasonic-assisted high-shear and low-pressure grinding of LN using ball-end body-armor-like abrasive tools. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. https://doi.org/10.1177/09544054261472397

Vancouver

Wang Z, Tian Y, Zhao S, Wei C, Kishore K, Qin L, et al. Interaction mechanisms and grinding-force behavior in ultrasonic-assisted high-shear and low-pressure grinding of LN using ball-end body-armor-like abrasive tools. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2026. doi:10.1177/09544054261472397

BibTeX
@article{Wang2026,
  author = {Wang, Zhiyin and Tian, Yebing and Zhao, Shuangchen and Wei, Chengwei and Kishore, Kamal and Qin, Longjie and Zhao, Yukang},
  title = {Interaction mechanisms and grinding-force behavior in ultrasonic-assisted high-shear and low-pressure grinding of LN using ball-end body-armor-like abrasive tools},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture},
  year = {2026},
  doi = {10.1177/09544054261472397}
}
Kostenlos starten →