Cutting performance of K403 cast nickel-based superalloy under E-MQL
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · 10.07.2026
DOI: 10.1177/09544054261466068 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, online erschienen am 10.07.2026. Verfasst von Zhenhua Jiao und 5 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Gefördert von: Natural Science Research Project of the Educational Department of Liaoning Province, Liaoning Province Department of Education Basic Research Project, Doctoral Research Start-up Foundation of Nanchang Hangkong University.
Abstract (Originalsprache)
Due to their excellent properties, high-temperature alloys are widely used in critical aeronautics and astronautics components. However, their low thermal conductivity and high strength significantly increase machining difficulty. Minimum Quantity Lubrication (MQL) is a technology that can effectively improve the friction conditions at the tool-chip interface and reduce cutting temperature. Currently, MQL typically uses a single-component oil mist or adds nanoparticles to enhance cutting performance. To further improve the environmental friendliness and cutting performance of MQL oil mist, this study uses biodegradable vegetable oil as the base fluid, ethanol as an additive, and K403 cast nickel-based superalloy as the material of interest. The cutting performance under various conditions—dry cutting, supercritical carbon dioxide (ScCO 2 ), ScCO 2 -MQL, 0%E-MQL (MQL), 25%E-MQL, 50%E-MQL, 75%E-MQL, and 100%E-MQL (Ethanol)—is investigated. The impact of different ethanol contents on the cutting performance of vegetable oil-based MQL is analyzed. The results indicate that under the 75%E-MQL condition, significant advantages in cutting performance are observed during the turning of K403 cast nickel-based superalloy. Compared to dry cutting, cutting temperature is reduced by 44%, tool life increases nearly five times, cutting force is reduced, and surface quality is improved. Applying single cooling or lubrication methods could not significantly enhance cutting performance.
Förderung
- Natural Science Research Project of the Educational Department of Liaoning Province
- Liaoning Province Department of Education Basic Research Project
- Doctoral Research Start-up Foundation of Nanchang Hangkong University
- Doctoral Start-up Foundation of Liaoning Province
- Natural Science Foundation of Jiangxi Province
- Liaoning Province Special Funding Support for Basic Research Operating Expenses of Provincial Universities
- Dalian Ocean University Doctoral Startup Project
Zitieren
APA
Jiao, Z., Deng, W., Luo, B., Gan, Y., Miao, J., & Wang, Z. (2026). Cutting performance of K403 cast nickel-based superalloy under E-MQL. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. https://doi.org/10.1177/09544054261466068
Vancouver
Jiao Z, Deng W, Luo B, Gan Y, Miao J, Wang Z. Cutting performance of K403 cast nickel-based superalloy under E-MQL. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2026. doi:10.1177/09544054261466068
BibTeX
@article{Jiao2026,
author = {Jiao, Zhenhua and Deng, Wenting and Luo, Bin and Gan, Yongquan and Miao, Jun and Wang, Ziguang},
title = {Cutting performance of K403 cast nickel-based superalloy under E-MQL},
journal = {Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture},
year = {2026},
doi = {10.1177/09544054261466068}
}
EUVIMED