Blue laser welding of copper-to-tinned steel and its pre-and-post processing for battery joining application
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · 03.04.2026
DOI: 10.1177/09544054261429809 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, online erschienen am 03.04.2026. Verfasst von Pratik Shukla und 8 weiteren Autor:innen. Die Arbeit nennt 54 Literaturangaben. Gefördert von: Innovate UK.
Abstract (Originalsprache)
Electrification has increased the need for high-quality copper welding, which is challenging due to high infrared laser wavelength reflectivity and post-processing requirements for welding copper. This preliminary study investigates a three-step approach, whereby: (1) green laser cleaning of copper, (2) blue laser welding of copper-to-tinned steel using a 1.5 kW CW laser emitting 445 nm, and (3) laser (shock) peening with a green (532nm) laser source using a compact/portable shock processing system for the first-time. Experiments on 0.9 mm copper over a 0.3 mm tinned steel were conducted following an assessment of the microstructure, hardness, shear strength,and residual stresses. Green laser cleaning improved surface roughness and impurity removal, while blue laser welding increased hardness, but introduced porosity and cracks. Triangular spot geometry yielded the best shear strength, especially when preceded by cleaning. Laser peening enhanced grain structure and the hardness, but had limited effect on shear strength. Residual stress analysis showed tensile stresses from cleaning/welding. Laser peening mitigated weld induced tensile residual stresses, though complete reversal to compressive stress was not achieved with the applied laser intentisties. The treatment demonstrates potential for improving residual stress states in dissimilar metal welds, with effectiveness dependent on process intensity and depth of influence as focused in future work. Future work will also optimize all three processes to improve copper weldability and structural integrity
Förderung
- Innovate UK
Zitieren
APA
Shukla, P., Teoh, S. S. H., Metsios, I., Cotterill, R., Gupta, S., Tolton, A., Maharjan, N., Wu, N., & Zhou, W. (2026). Blue laser welding of copper-to-tinned steel and its pre-and-post processing for battery joining application. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. https://doi.org/10.1177/09544054261429809
Vancouver
Shukla P, Teoh SSH, Metsios I, Cotterill R, Gupta S, Tolton A, et al. Blue laser welding of copper-to-tinned steel and its pre-and-post processing for battery joining application. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2026. doi:10.1177/09544054261429809
BibTeX
@article{Shukla2026,
author = {Shukla, Pratik and Teoh, Sean Shi Hao and Metsios, Ioannis and Cotterill, Ryan and Gupta, Sanjay and Tolton, Aurelie and Maharjan, Niroj and Wu, Naien and Zhou, Wei},
title = {Blue laser welding of copper-to-tinned steel and its pre-and-post processing for battery joining application},
journal = {Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture},
year = {2026},
doi = {10.1177/09544054261429809}
}
EUVIMED