EUVIMEDEUVIMED entdecken
Crossref

Analytical modeling of cutting force in machining of SiCp/Al composites by ultrasonic elliptical vibration-assisted turning

Jiakang Zhou, Mingming Lu, Jieqiong Lin, Xiaoxiao Su, Wenqing Wei

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · 2024-07 · 238 (9) · 1270-1281

DOI: 10.1177/09544054231197337 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, online erschienen am 20.09.2023. Verfasst von Jiakang Zhou und 4 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 44 Literaturangaben. Gefördert von: Doctoral Research Initiation Fund of Weifang University, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To predict the cutting force in machining of SiCp/Al composites by ultrasonic elliptical vibration-assisted turning (UEVT) technology, a semi-empirical geometric model considering the deformation and friction characteristics in different deformation areas is established in this paper. During UEVT, the resistance force acting on cutting edge is divided into three parts according to different deformation zones: shear force, interface friction, and plowing force. The vibration characteristic functions are also coupled to the semi-empirical geometric model of cutting force. A three factor and four level orthogonal tests is implemented to verify the validity of geometric model, and the single factor cutting experiments are also conducted to evaluate the influence law of relevant parameter on cutting force. Experimental results show that the deviation between the calculated value of cutting force and measured average value is less than 17%, and the average deviation is 8.16%, which proved that the semi-empirical geometric model can effectively predict the cutting force of SiCp/Al composites during UEVT. In addition, the influence of cutting parameters and volume fraction on cutting force is discussed, which provides a theoretical guidance for the outstanding machinability of SiCp/Al composites in UEVT.

Förderung

  • Doctoral Research Initiation Fund of Weifang University
  • National Natural Science Foundation of China

Zitieren

APA

Zhou, J., Lu, M., Lin, J., Su, X., & Wei, W. (2024). Analytical modeling of cutting force in machining of SiCp/Al composites by ultrasonic elliptical vibration-assisted turning. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 238(9), 1270-1281. https://doi.org/10.1177/09544054231197337

Vancouver

Zhou J, Lu M, Lin J, Su X, Wei W. Analytical modeling of cutting force in machining of SiCp/Al composites by ultrasonic elliptical vibration-assisted turning. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2024;238(9):1270-1281. doi:10.1177/09544054231197337

BibTeX
@article{Zhou2024,
  author = {Zhou, Jiakang and Lu, Mingming and Lin, Jieqiong and Su, Xiaoxiao and Wei, Wenqing},
  title = {Analytical modeling of cutting force in machining of SiCp/Al composites by ultrasonic elliptical vibration-assisted turning},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture},
  year = {2024},
  volume = {238},
  number = {9},
  pages = {1270--1281},
  doi = {10.1177/09544054231197337}
}
Kostenlos starten →