EUVIMEDEUVIMED entdecken
Crossref

A comprehensive machinability comparison during milling of AISI 52100 steel under dry and cryogenic cutting conditions

M Saravana Kumar, PK Shafeer, Nimel Sworna Ross, Kashif Ishfaq, Adeolu A Adediran, Abayomi Adewale Akinwande

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · 2023-02 · 237 (3) · 364-376

DOI: 10.1177/09544054221101749 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, online erschienen am 27.05.2022. Verfasst von M Saravana Kumar und 5 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 33 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fabrication of complex and flat shapes is usually processed by milling operation with multi-point cutting tools. In this research, the potential of cryogenic and dry milling was investigated under varying cutting speed (50–250 m/min) and the feed (0.05–0.15 mm/tooth), while machining of AISI 52100 steel at a constant depth of cut. PVD TiAlN coated carbide cutting tool was employed in this research. The results show a reduction of 52%–78% in the white layer (WL) thickness under cryogenic cooling (LN 2 ) environment due to its high thermal cooling effect. A drop out of 49% in the cutting temperature has also been observed if LN 2 cooling is used instead of dry milling. Cryogenic cooling provides a 28%, 28%, and 29% decrease in the cutting forces; F X , F Y , and F Z , in comparison with the dry milling. Furthermore, the roughness of the machined specimen reduces by 29% if the LN 2 cooling mechanism is engaged in milling of AISI 52100. Study of chips morphology revealed that the cryogenic LN 2 machining produced discontinuous, thin and small serrated chips with silver color.

Zitieren

APA

Kumar, M. S., Shafeer, P., Ross, N. S., Ishfaq, K., Adediran, A. A., & Akinwande, A. A. (2023). A comprehensive machinability comparison during milling of AISI 52100 steel under dry and cryogenic cutting conditions. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 237(3), 364-376. https://doi.org/10.1177/09544054221101749

Vancouver

Kumar MS, Shafeer P, Ross NS, Ishfaq K, Adediran AA, Akinwande AA. A comprehensive machinability comparison during milling of AISI 52100 steel under dry and cryogenic cutting conditions. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2023;237(3):364-376. doi:10.1177/09544054221101749

BibTeX
@article{Kumar2023,
  author = {Kumar, M Saravana and Shafeer, PK and Ross, Nimel Sworna and Ishfaq, Kashif and Adediran, Adeolu A and Akinwande, Abayomi Adewale},
  title = {A comprehensive machinability comparison during milling of AISI 52100 steel under dry and cryogenic cutting conditions},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture},
  year = {2023},
  volume = {237},
  number = {3},
  pages = {364--376},
  doi = {10.1177/09544054221101749}
}
Kostenlos starten →