EUVIMEDEUVIMED entdecken
Crossref

Enhancing tensile and flexural strength of ABS/graphene nanocomposites through FFF parameter optimization

Sanket S Chikshe, Manmohan M Bhoomkar

Journal of Thermoplastic Composite Materials · 28.10.2026

DOI: 10.1177/08927057261504342 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Thermoplastic Composite Materials, online erschienen am 28.10.2026. Verfasst von Sanket S Chikshe und 1 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing, specifically fused filament fabrication (FFF), has transformed the manufacture of complex thermoplastic components; nonetheless, weak interlayer bonding and anisotropic behaviour remain major limitations on mechanical performance. Graphene-reinforced polymers and Taguchi-based FFF parameter optimization have each been studied extensively, but their combined effect on ABS composites — specifically how graphene nanoplatelet (GNP) loading interacts with layer thickness, build orientation, infill pattern, and infill density to govern tensile and flexural performance — has not been systematically quantified; this study addresses that gap. Melt blending and single-screw extrusion were used to prepare ABS/GNP composite filaments at 0.5, 1, and 1.5 wt% GNP loadings, and for each composition a Taguchi L27 orthogonal array was used to evaluate four FFF process parameters (layer thickness, build orientation, infill pattern, and infill density). Specimens were tested per ASTM D638 (tensile) and ASTM D790 (flexural). Among the GNP loadings, ABS/0.5 wt% GNP produced the highest mean tensile (21.52 MPa) and flexural (39.42 MPa) strengths, indicating that the lower GNP content achieved better dispersion under the melt-blending conditions used, while the 1 and 1.5 wt% loadings showed evidence of agglomeration-related reductions in strength. Within the ABS/0.5 wt% GNP composition, the parameter combination of 0.19 mm layer thickness, on-long-edge orientation, grid infill pattern, and 90% infill density produced the best confirmed tensile and flexural strengths of 40.1 MPa and 56.9 MPa, respectively, with a prediction error below 3%. A correctly parameterized ANOVA (two degrees of freedom per three-level factor) identified build orientation as the dominant parameter, contributing 81.8% to tensile strength and 50.7% to flexural strength, followed by infill density (10.8%/29.1%) and infill pattern (3.1%/16.7%), while layer thickness was not statistically significant.

Zitieren

APA

Chikshe, S. S., & Bhoomkar, M. M. (2026). Enhancing tensile and flexural strength of ABS/graphene nanocomposites through FFF parameter optimization. Journal of Thermoplastic Composite Materials. https://doi.org/10.1177/08927057261504342

Vancouver

Chikshe SS, Bhoomkar MM. Enhancing tensile and flexural strength of ABS/graphene nanocomposites through FFF parameter optimization. Journal of Thermoplastic Composite Materials. 2026. doi:10.1177/08927057261504342

BibTeX
@article{Chikshe2026,
  author = {Chikshe, Sanket S and Bhoomkar, Manmohan M},
  title = {Enhancing tensile and flexural strength of ABS/graphene nanocomposites through FFF parameter optimization},
  journal = {Journal of Thermoplastic Composite Materials},
  year = {2026},
  doi = {10.1177/08927057261504342}
}
Kostenlos starten →