Effectiveness of pista shell filler content and injection molding parameters on characteristics of PLA based green composites
Journal of Thermoplastic Composite Materials · 2026-04 · 39 (4) · 1849-1882
DOI: 10.1177/08927057251382837 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Thermoplastic Composite Materials, online erschienen am 23.09.2025. Verfasst von Avinash Petta und 1 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 30 Literaturangaben.
Abstract (Originalsprache)
This research explores the application of pistachio shell powder (PSP), an agro-waste product, as a bio-filler for polylactic acid (PLA) for the development of sustainable green composites using injection molding. The study utilizes Box-Behnken Design (BBD) to optimize prominent processing parameters, and the properties of the resultant composites are explored through Response Surface Methodology (RSM). The results indicate that the addition of PSP greatly affects the mechanical characteristics of PLA composites, with increasing percentages of fillers contributing to the enhanced tensile and flexural moduli but decreasing elongation and strength. Confirmation of the significant effects of PSP and machining conditions on composite properties is found in ANOVA results, which indicate the suitability of agro-waste fillers to improve the performance of green composites. These results set avenues for applications in biodegradable packaging material and ecologically friendly materials but require further investigation to tackle the batch to batch variability across seasons and regions.
Zitieren
APA
Petta, A., & Kachhap, S. (2026). Effectiveness of pista shell filler content and injection molding parameters on characteristics of PLA based green composites. Journal of Thermoplastic Composite Materials, 39(4), 1849-1882. https://doi.org/10.1177/08927057251382837
Vancouver
Petta A, Kachhap S. Effectiveness of pista shell filler content and injection molding parameters on characteristics of PLA based green composites. Journal of Thermoplastic Composite Materials. 2026;39(4):1849-1882. doi:10.1177/08927057251382837
BibTeX
@article{Petta2026,
author = {Petta, Avinash and Kachhap, Sabindra},
title = {Effectiveness of pista shell filler content and injection molding parameters on characteristics of PLA based green composites},
journal = {Journal of Thermoplastic Composite Materials},
year = {2026},
volume = {39},
number = {4},
pages = {1849--1882},
doi = {10.1177/08927057251382837}
}
EUVIMED