EUVIMEDEUVIMED entdecken
Crossref

Mechanical behavior and microstructural analysis of rotomolded LLDPE composites filled with surface-modified peanut shell powder

Prashant Khanna, P. L. Ramkumar

Journal of Thermoplastic Composite Materials · 2026-03 · 39 (3) · 941-962

DOI: 10.1177/08927057251361019 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Thermoplastic Composite Materials, online erschienen am 14.07.2025. Verfasst von Prashant Khanna und 1 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 53 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research explores the synthesis of sustainable polymer composites through the incorporation of alkali-treated peanut shell powder (TPSP) in linear low-density polyethylene (LLDPE) using rotational molding. The peanut shells were treated with 5% NaOH solution, and FTIR analysis followed by thermogravimetric analysis proved the elimination of non-cellulosic content such as lignin and hemicellulose. Composites of TPSP concentration in the range of 3-15 wt% were analyzed for mechanical and morphological properties. Tensile strength fell from 13.82 MPa to 7.51 MPa with increasing TPSP concentration, whereas stiffness increased substantially. The tensile modulus rose by 93% (395.06 MPa) at 9 wt%, and impact strength rose by 94% (107.22 J/m) up to 9 wt%, before reducing at higher concentrations. Flexural modulus reached its peak at 9 wt% (482.71 MPa), with an increase of 42%, and maintained a 21% increase at maximum loading. Microstructural analysis proved excellent fiber dispersion and matrix adhesion in the range of 3-9 wt%, with agglomeration at higher concentration. The research concludes that 9 wt% TPSP achieves an optimal balance of mechanical properties and processability as a sustainable reinforcement for LLDPE composites in applications demanding high stiffness and impact resistance. This research identifies TPSP as cost-effective, eco-friendly filler for rotational molding.

Zitieren

APA

Khanna, P., & Ramkumar, P. L. (2026). Mechanical behavior and microstructural analysis of rotomolded LLDPE composites filled with surface-modified peanut shell powder. Journal of Thermoplastic Composite Materials, 39(3), 941-962. https://doi.org/10.1177/08927057251361019

Vancouver

Khanna P, Ramkumar PL. Mechanical behavior and microstructural analysis of rotomolded LLDPE composites filled with surface-modified peanut shell powder. Journal of Thermoplastic Composite Materials. 2026;39(3):941-962. doi:10.1177/08927057251361019

BibTeX
@article{Khanna2026,
  author = {Khanna, Prashant and Ramkumar, P. L.},
  title = {Mechanical behavior and microstructural analysis of rotomolded LLDPE composites filled with surface-modified peanut shell powder},
  journal = {Journal of Thermoplastic Composite Materials},
  year = {2026},
  volume = {39},
  number = {3},
  pages = {941--962},
  doi = {10.1177/08927057251361019}
}
Kostenlos starten →