Assessment of selective flame-retardant transport to household dust from polymeric matrices
Journal of Fire Sciences · 2026-11 · 44 (6) · 394-421
DOI: 10.1177/07349041261489097 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Fire Sciences, online erschienen am 28.09.2026. Verfasst von Laura F. Guidugli und 4 weiteren Autor:innen. Die Arbeit nennt 80 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: American Chemical Council.
Abstract (Originalsprache)
In this study, the migration behavior of three commercially relevant flame retardants—decabromodiphenyl ethane, tetrabromobisphenol A, and resorcinol bis(diphenyl phosphate)—was investigated in acrylonitrile–butadiene–styrene, polypropylene, and polycarbonate/acrylonitrile–butadiene–styrene matrices. Thermal stability, fire performance, blooming behavior, and dust transfer were evaluated using thermogravimetric analysis, Underwriters Laboratory (UL-94) vertical flame testing, ion chromatography, inductively coupled plasma optical emission spectroscopy, scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy, and diffusion modeling. All flame-retardant formulations achieved UL-94 V-0 classification, demonstrating effective fire performance relative to untreated controls. Reliable quantification by ion chromatography and inductively coupled plasma optical emission spectroscopy was achieved using compound-specific extraction and digestion procedures that demonstrated quantitative recovery of the target analytes. No measurable blooming was observed for acrylonitrile–butadiene–styrene + decabromodiphenyl ethane, acrylonitrile–butadiene–styrene + tetrabromobisphenol A, or polycarbonate/acrylonitrile–butadiene–styrene + resorcinol bis(diphenyl phosphate) during 30 days of accelerated aging at 70°C. In contrast, polypropylene + decabromodiphenyl ethane exhibited measurable surface migration, with bromine recoveries of 2.33 ± 0.01, 2.77 ± 0.33, and 0.72 ± 0.08 mg/cm 2 at days 1, 14, and 30, respectively. No measurable blooming was detected for any formulation during ambient aging at 25°C. The initial polypropylene + decabromodiphenyl ethane blooming regime was adequately described by Fick’s diffusion model, yielding an effective diffusion coefficient of 1.2 × 10 −13 m 2 /s. Measurable bromine transfer to settled dust was observed only for polypropylene + decabromodiphenyl ethane under accelerated aging (70°C), and reducing the dust loading from 60 to 30 g/m 2 resulted in an approximately 50-fold decrease in bromine concentration. Scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy confirmed the presence and spatial distribution of bromine within the collected dust but did not resolve the underlying transfer mechanism. Collectively, the results demonstrate formulation- and temperature-dependent differences in flame-retardant blooming and dust transfer and establish an association between measurable surface blooming and subsequent dust transfer under the conditions investigated.
Förderung
- American Chemical Council
Zitieren
APA
Guidugli, L. F., Jappen, O., Tenney, J., Nelson, G., & Reza, T. (2026). Assessment of selective flame-retardant transport to household dust from polymeric matrices. Journal of Fire Sciences, 44(6), 394-421. https://doi.org/10.1177/07349041261489097
Vancouver
Guidugli LF, Jappen O, Tenney J, Nelson G, Reza T. Assessment of selective flame-retardant transport to household dust from polymeric matrices. Journal of Fire Sciences. 2026;44(6):394-421. doi:10.1177/07349041261489097
BibTeX
@article{Guidugli2026,
author = {Guidugli, Laura F. and Jappen, Owen and Tenney, Joel and Nelson, Gordon and Reza, Toufiq},
title = {Assessment of selective flame-retardant transport to household dust from polymeric matrices},
journal = {Journal of Fire Sciences},
year = {2026},
volume = {44},
number = {6},
pages = {394--421},
doi = {10.1177/07349041261489097}
}
EUVIMED