Recycling potential of carbon fibres in the construction industry: From a technical and ecological perspective
Waste Management & Research: The Journal for a Sustainable Circular Economy · 2024
DOI: 10.1177/0734242x241237197 ↗Kurz gefasst
Fachartikel in der Zeitschrift Waste Management & Research: The Journal for a Sustainable Circular Economy, 2024. Verfasst von Berfin Bayram und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Anthropogenic Material Cycles, RWTH Aachen University, Aachen, Germany. Hauptthemen laut MEDLINE: Recycling, Construction Materials, Construction Industry, Carbon Fiber. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Innovation, Science and Research North Rhine-Westphalian.
Abstract (Originalsprache)
Even though carbon fibres (CFs) have been increasingly used, their end-of-life (EOL) handling presents a challenge. To address this issue, we evaluated the use of recycled CFs (rCFs), produced through pyrolysis, as rovings to be used in textile reinforced concrete structures. Mechanical processing (hammer mill) with varying machine settings was then used to assess EOL handling, considering the separation potential of rCFs and the length of separated rCFs. The results showed that rCF rovings can be separated from concrete with an average of 87 wt.-%, whereas the highest rCF length and separation yield were observed in different machine settings. In addition, a techno-environmental assessment on the mechanical process was performed to compare different machine settings. The machine settings with the highest yield of rCF rovings also had the highest fine fraction that cannot be further separated. Furthermore, life cycle assessment (LCA) was conducted covering three life cycles of CFs and an additional LCA for comparing rCF with virgin CF. LCA results revealed that CF reinforced plastic and concrete productions are the two main contributors to environmental impacts. The comparative LCA between virgin CF and rCF also showed that using rCF is environmentally advantageous, as virgin CF production causes 230% more global warming potential compared to rCF. Future studies assessing different allocation approaches, quantifying the quality of rCF, and its inclusion in LCA are relevant.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Anthropogenic Material Cycles, RWTH Aachen University, Aachen, Germany.
- RWTH Aachen University, Institut für Textiltechnik, Aachen, Germany.
- RWTH Aachen University, Aachen, Germany.
ORCID-Profile: Berfin Bayram, Vanessa Overhage, Karoline Raulf
Förderung
- Ministry of Innovation, Science and Research North Rhine-Westphalian
Zitieren
APA
Bayram, B., Overhage, V., Löwen, M., Terörde, K., Raulf, K., Greiff, K., & Gries, T. (2024). Recycling potential of carbon fibres in the construction industry: From a technical and ecological perspective. Waste Management & Research: The Journal for a Sustainable Circular Economy. https://doi.org/10.1177/0734242x241237197
Vancouver
Bayram B, Overhage V, Löwen M, Terörde K, Raulf K, Greiff K, et al. Recycling potential of carbon fibres in the construction industry: From a technical and ecological perspective. Waste Management & Research: The Journal for a Sustainable Circular Economy. 2024. doi:10.1177/0734242x241237197
BibTeX
@article{Bayram2024,
author = {Bayram, Berfin and Overhage, Vanessa and Löwen, Marco and Terörde, Katharina and Raulf, Karoline and Greiff, Kathrin and Gries, Thomas},
title = {Recycling potential of carbon fibres in the construction industry: From a technical and ecological perspective},
journal = {Waste Management & Research: The Journal for a Sustainable Circular Economy},
year = {2024},
doi = {10.1177/0734242x241237197}
}
EUVIMED