Developing a prediction model in a lightweight packaging waste sorting plant using sensor-based sorting data combined with data of external near-infrared and LiDAR sensors
Waste Management & Research: The Journal for a Sustainable Circular Economy · 2024
DOI: 10.1177/0734242x241237184 ↗Kurz gefasst
Fachartikel in der Zeitschrift Waste Management & Research: The Journal for a Sustainable Circular Economy, 2024. Verfasst von Sabine Schloegl und 5 weiteren Autor:innen. Beteiligte Einrichtung: Chair of Waste Processing Technology and Waste Management, Montanuniversität Leoben, Leoben, Austria. Hauptthemen laut MEDLINE: Waste Management. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Österreichische Forschungsförderungsgesellschaft.
Abstract (Originalsprache)
Sensor-based material flow monitoring allows for continuously high output qualities, through quality management and process control. The implementation in the waste management sector, however, is inhibited by the heterogeneity of waste and throughput fluctuations. In this study, challenges and possibilities of using different types of sensors in a lightweight packaging waste sorting plant are investigated. Three external sensors have been mounted on different positions in an Austrian sorting plant: one Light Detection and Ranging (LiDAR) sensor for monitoring the volume flow and two near-infrared (NIR) sensors for measuring the pixel-based material composition and occupation density. Additionally, the data of an existing sensor-based sorter (SBS) were evaluated. To predict the newly introduced parameter material-specific occupation density (MSOD) of multi-coloured polyethylene terephthalate (PET) preconcentrate, different machine learning models were evaluated. The results indicate that using SBS data for both monitoring of throughput fluctuations caused by different bag opener settings as well as monitoring the material composition is feasible, if the pre-set teach-in is suitable. The ridge regression model based on SBS was comparable (RMSE = 3.59 px%, R² = 0.57) to the one based on NIR and LiDAR (RMSE = 3.1 px%, R² = 0.68). The demonstrated feasibility of the implementation at plant scale highlights the opportunities of sensor-based material flow monitoring for the waste management sector and paves the way towards a more circular plastics economy.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Chair of Waste Processing Technology and Waste Management, Montanuniversität Leoben, Leoben, Austria.
- Siemens AG Österreich, Vienna, Austria.
- Department of Anthropogenic Material Cycles, RWTH Aachen University, Aachen, Germany.
- Stadler Anlagenbau GmbH, Altshausen, Germany.
- Institute for Materials Resource Management, Chair of Resource and Chemical Engineering, University of Augsburg, Augsburg, Germany.
ORCID-Profile: Sabine Schloegl, Nils Kroell, Daniel Vollprecht
Förderung
- Österreichische Forschungsförderungsgesellschaft
Zitieren
APA
Schloegl, S., Kamleitner, J., Kroell, N., Chen, X., Vollprecht, D., & Tischberger-Aldrian, A. (2024). Developing a prediction model in a lightweight packaging waste sorting plant using sensor-based sorting data combined with data of external near-infrared and LiDAR sensors. Waste Management & Research: The Journal for a Sustainable Circular Economy. https://doi.org/10.1177/0734242x241237184
Vancouver
Schloegl S, Kamleitner J, Kroell N, Chen X, Vollprecht D, Tischberger-Aldrian A. Developing a prediction model in a lightweight packaging waste sorting plant using sensor-based sorting data combined with data of external near-infrared and LiDAR sensors. Waste Management & Research: The Journal for a Sustainable Circular Economy. 2024. doi:10.1177/0734242x241237184
BibTeX
@article{Schloegl2024,
author = {Schloegl, Sabine and Kamleitner, Josef and Kroell, Nils and Chen, Xiaozheng and Vollprecht, Daniel and Tischberger-Aldrian, Alexia},
title = {Developing a prediction model in a lightweight packaging waste sorting plant using sensor-based sorting data combined with data of external near-infrared and LiDAR sensors},
journal = {Waste Management & Research: The Journal for a Sustainable Circular Economy},
year = {2024},
doi = {10.1177/0734242x241237184}
}
EUVIMED