EUVIMEDEUVIMED entdecken
Crossref

Foaming and crystallization behaviors of natural ramie fiber reinforced poly(lactic acid) composites

Jiao Li, Yingxiao Wang, Chuanying Wang, Yachao Guo, Haiming Zhang, Jinjie Lu, Xiangqian Xie, Yanpeng Bao, Jun Lin, Guilong Wang

Journal of Reinforced Plastics and Composites · 21.11.2026

DOI: 10.1177/07316844261505396 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Reinforced Plastics and Composites, online erschienen am 21.11.2026. Verfasst von Jiao Li und 9 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The microcellular foams based on biocompatible and biodegradable polylactic acid (PLA) produced by supercritical fluids can improve the toughness, achieve lightweighting, and reduce production cost. This study proposes an eco-friendly approach by incorporating ramie fiber (RF) with PLA to enhance the foaming ability without compromising the biodegradable nature. In this work, the influence of foaming pressure and temperature in one-step autoclave press relief process on the foaming and crystallization behaviors of composite foams are systematically researched, and the influencing laws and mechanisms are clarified. Experimental results indicate that, the maximum expansion ratio can be reached 10.43, when using processing temperature of 112°C, pressure of 15 MPa, and foaming time of 40 min, respectively. The thermal performance of RF-reinforced PLA composite foam is significantly influenced by the foaming temperature and CO 2 plasticizing effect. PLA/RF foam manufactured at low foaming temperature (100–115°C) and low saturation pressure (10–17.5 MPa) shows double peaks of melting, and in contrast high foaming temperature (120°C) and high saturation pressure (20 MPa) assigns a single peak of melting. This study provides an effective autoclave foaming method using physical agent CO 2 for preparing a green natural fiber composite foam, with potential application value in packaging, automotive/aircraft interior decoration, building decoration, and other fields.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Li, J., Wang, Y., Wang, C., Guo, Y., Zhang, H., Lu, J., Xie, X., Bao, Y., Lin, J., & Wang, G. (2026). Foaming and crystallization behaviors of natural ramie fiber reinforced poly(lactic acid) composites. Journal of Reinforced Plastics and Composites. https://doi.org/10.1177/07316844261505396

Vancouver

Li J, Wang Y, Wang C, Guo Y, Zhang H, Lu J, et al. Foaming and crystallization behaviors of natural ramie fiber reinforced poly(lactic acid) composites. Journal of Reinforced Plastics and Composites. 2026. doi:10.1177/07316844261505396

BibTeX
@article{Li2026,
  author = {Li, Jiao and Wang, Yingxiao and Wang, Chuanying and Guo, Yachao and Zhang, Haiming and Lu, Jinjie and Xie, Xiangqian and Bao, Yanpeng and Lin, Jun and Wang, Guilong},
  title = {Foaming and crystallization behaviors of natural ramie fiber reinforced poly(lactic acid) composites},
  journal = {Journal of Reinforced Plastics and Composites},
  year = {2026},
  doi = {10.1177/07316844261505396}
}
Kostenlos starten →