Study on curing characteristics and mechanical properties of the mid-temperature epoxy prepreg regulated by accelerator
Journal of Reinforced Plastics and Composites · 27.07.2026
DOI: 10.1177/07316844261472542 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Reinforced Plastics and Composites, online erschienen am 27.07.2026. Verfasst von Xuelian Tang und 4 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Gefördert von: National Science and Technology Major Project of China.
Abstract (Originalsprache)
To address the high energy consumption and cost of conventional autoclave curing, this study develops a mid-temperature (100-130°C) curing epoxy prepreg system for vacuum bag molding. The effects of two curing accelerators (UR300 organic urea and 2,4-EMI imidazole) on the curing characteristics, reaction kinetics, and room-temperature storage stability of dicyandiamide/epoxy (DICY/EP) systems were systematically compared. Unidirectional [0°] laminates were prepared using Toray T700 carbon fibre (12K) and an optimized resin formulation. The curing process was carried out under a vacuum pressure of 0.098 MPa. The results showed that UR300 achieved a better balance between curing reactivity and room-temperature latency than 2,4-EMI. UR300 lowered the peak curing temperature from 189.5°C to 128.8°C, satisfying mid-temperature curing requirements. After 30 days of room-temperature storage, the curing degree was only 9.7% (calculated via DSC residual enthalpy), and the mechanical properties of the castings decreased by less than 10%. The optimized composite laminates achieved a fibre volume fraction of 63.8%, a porosity of 1.29%, a tensile strength of 1.70 GPa, a bending strength of 1.11 GPa, and an interlaminar shear strength (ILSS) of 63.4 MPa. This study offers theoretical and experimental insights for developing mid-temperature curing epoxy prepreg systems tailored to low-altitude aircraft applications.
Förderung
- National Science and Technology Major Project of China
Zitieren
APA
Tang, X., Li, Y., Hu, Z., He, Z., & Han, B. (2026). Study on curing characteristics and mechanical properties of the mid-temperature epoxy prepreg regulated by accelerator. Journal of Reinforced Plastics and Composites. https://doi.org/10.1177/07316844261472542
Vancouver
Tang X, Li Y, Hu Z, He Z, Han B. Study on curing characteristics and mechanical properties of the mid-temperature epoxy prepreg regulated by accelerator. Journal of Reinforced Plastics and Composites. 2026. doi:10.1177/07316844261472542
BibTeX
@article{Tang2026,
author = {Tang, Xuelian and Li, Yong and Hu, Zehui and He, Zhaohui and Han, Bing},
title = {Study on curing characteristics and mechanical properties of the mid-temperature epoxy prepreg regulated by accelerator},
journal = {Journal of Reinforced Plastics and Composites},
year = {2026},
doi = {10.1177/07316844261472542}
}
EUVIMED