EUVIMEDEUVIMED entdecken
Crossref

Influence of metal surface groove depth on FSLW of 6061-T6 Al alloy and CFRTP

Yibo Sun, Jianliang Chen, Yiqiao Li, Chenhuan Tang, Libin Fu, Xinhua Yang

Journal of Reinforced Plastics and Composites · 26.07.2026

DOI: 10.1177/07316844261471990 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Reinforced Plastics and Composites, online erschienen am 26.07.2026. Verfasst von Yibo Sun und 5 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Gefördert von: Fundamental Research Funds for the Provincial Universities of Liaoning, National Natural Science Foundation of China, National Key Laboratory of Special Vehicle Design and Manufacturing Integration Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lightweighting plays a crucial role in product engineering applications. Polymers exhibit broad applications and development prospects due to their excellent mechanical properties. Friction stir welding (FSW) is a robust joining technology for metal/polymer combinations. In this study, various depths of surface grooves were created on the aluminum (Al) alloy sheets. Carbon-fiber-reinforced thermoplastic composites (CFRTP) and Al alloy sheets were welded using friction stir lap welding (FSLW). An infrared temperature camera captured the welding temperature. The microstructure of the joints was analyzed using an optical microscope (OM), and the tensile properties were evaluated through tensile tests. The results indicated that the surface groove facilitates the mixture of different materials, the formation of mechanical interlock, and the adhesion between different materials, thereby enhancing the reliability and tensile strength of the dissimilar material joint. The maximum tensile strength is 38.01 MPa, representing 71.71% of the CFRTP base strength. However, excessive depth leads to the formation of tunnels on the welding seam surface, resulting in significant defects in the joint. Surface temperature has a negative correlation with groove depth; however, it has a minimal effect on dissimilar material mixing in the joint.

Förderung

  • Fundamental Research Funds for the Provincial Universities of Liaoning
  • National Natural Science Foundation of China
  • National Key Laboratory of Special Vehicle Design and Manufacturing Integration Technology

Zitieren

APA

Sun, Y., Chen, J., Li, Y., Tang, C., Fu, L., & Yang, X. (2026). Influence of metal surface groove depth on FSLW of 6061-T6 Al alloy and CFRTP. Journal of Reinforced Plastics and Composites. https://doi.org/10.1177/07316844261471990

Vancouver

Sun Y, Chen J, Li Y, Tang C, Fu L, Yang X. Influence of metal surface groove depth on FSLW of 6061-T6 Al alloy and CFRTP. Journal of Reinforced Plastics and Composites. 2026. doi:10.1177/07316844261471990

BibTeX
@article{Sun2026,
  author = {Sun, Yibo and Chen, Jianliang and Li, Yiqiao and Tang, Chenhuan and Fu, Libin and Yang, Xinhua},
  title = {Influence of metal surface groove depth on FSLW of 6061-T6 Al alloy and CFRTP},
  journal = {Journal of Reinforced Plastics and Composites},
  year = {2026},
  doi = {10.1177/07316844261471990}
}
Kostenlos starten →