EUVIMEDEUVIMED entdecken
Crossref

Mechanical and tribological performance of neat epoxy, epoxy-graphene nanoplatelets, and epoxy-carbon nanotubes

Helena Guimarães, Karoline Sales de Oliveira, Joziel Aparecido da Cruz, Sandro Campos Amico, Thiago Doca

Journal of Reinforced Plastics and Composites · 05.06.2026

DOI: 10.1177/07316844261458853 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Reinforced Plastics and Composites, online erschienen am 05.06.2026. Verfasst von Helena Guimarães und 4 weiteren Autor:innen. Die Arbeit nennt 49 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Epoxy polymer is widely used in adhesives, coatings, and composite structures due to its mechanical resistance, chemical stability, and low friction. However, high brittleness and low abrasive resistance limit its range of applications. In this work, an epoxy polymeric matrix is reinforced with carbon nanotubes (CNTs) or graphene nanoplatelets (GNPs), for an expected improvement in mechanical and tribological performance. Concentrations of 0.5% wt and 1.0% wt are investigated. Monotonic tensile tests (under three displacement rates) and tensile-tensile fatigue tests were carried out. Tensile and fatigue strength degraded due to a greater number of discontinuities demonstrated by microscopic analysis. Brinnel and instrumented indentations tests were performed, to assess hardness and compressive stress-strain behavior. They revealed that 0.5% GNP increased hardness, while 0.5% CNT and 1.0% GNP reduced compressive stiffness. Rotating sphere micro-abrasive tests were carried out for the evaluation of wear performance. 1.0% GNP and 0.5% CNT significantly reduced the wear coefficient (−47% and −41%, respectively) when compared to neat epoxy. In conclusion, voids and filler agglomerates had a negative impact on bulk mechanical properties, restricting usage in structural applications. However, the significant reduction in wear shows that GNP and CNT could be successfully employed as reinforcement in protective epoxy coatings.

Zitieren

APA

Guimarães, H., Oliveira, K. S. D., Cruz, J. A. D., Amico, S. C., & Doca, T. (2026). Mechanical and tribological performance of neat epoxy, epoxy-graphene nanoplatelets, and epoxy-carbon nanotubes. Journal of Reinforced Plastics and Composites. https://doi.org/10.1177/07316844261458853

Vancouver

Guimarães H, Oliveira KSD, Cruz JAD, Amico SC, Doca T. Mechanical and tribological performance of neat epoxy, epoxy-graphene nanoplatelets, and epoxy-carbon nanotubes. Journal of Reinforced Plastics and Composites. 2026. doi:10.1177/07316844261458853

BibTeX
@article{Guimares2026,
  author = {Guimarães, Helena and Oliveira, Karoline Sales de and Cruz, Joziel Aparecido da and Amico, Sandro Campos and Doca, Thiago},
  title = {Mechanical and tribological performance of neat epoxy, epoxy-graphene nanoplatelets, and epoxy-carbon nanotubes},
  journal = {Journal of Reinforced Plastics and Composites},
  year = {2026},
  doi = {10.1177/07316844261458853}
}
Kostenlos starten →