EUVIMEDEUVIMED entdecken
Crossref

Masked stereolithography-based additive manufacturing of radiopaque biocomposites for enhanced imaging in potential bio-implant applications

Gourav Sardana, Kanad Harshal Nemade, Abhijit Vyas, Subrata Bandhu Ghosh, Juan Segurola, Savinder Yadav, Sanchita Bandyopadhyay-Ghosh

Journal of Reinforced Plastics and Composites · 05.05.2026

DOI: 10.1177/07316844261448744 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Reinforced Plastics and Composites, online erschienen am 05.05.2026. Verfasst von Gourav Sardana und 6 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Many medical conditions require biocompatible and biodegradable implants that are visible under non-invasive imaging. However, the inherent radiotransparency of polymer-based devices limits post-operative monitoring. This study reports a silk powder-reinforced radiopaque composite for orthopaedic and tissue engineering applications, fabricated via masked stereolithography (MSLA) with intrinsic X-ray visibility. Radiopaque ceramic fillers were incorporated at varying concentrations, and silk powder was added as a particulate reinforcement. Printed samples were characterised using X-ray imaging, contact angle goniometry, Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), Raman spectroscopy, and mechanical testing. The composite containing 25 wt% radiopaque material, 0.5 wt% silk powder, and 0.2 wt% silane coupling agent exhibited an optimal balance of radiopacity and mechanical performance, with a tensile strength of 48.9 ± 4.0 MPa, flexural strength of 86.2 ± 1.5 MPa, and compressive strength of 292.4 ± 8.7 MPa. While high radiopaque filler loading alone reduced mechanical properties, silk compensated for this effect, preserving both structural integrity and radiographic visibility comparable to a metallic reference. Contact angle measurements indicated hydrophilic behaviour favourable for biological integration. These results demonstrate the composite’s strong potential for fabricating patient-specific, load-bearing implants that are both structurally robust and radiographically trackable, addressing a key challenge in post-operative care.

Zitieren

APA

Sardana, G., Nemade, K. H., Vyas, A., Ghosh, S. B., Segurola, J., Yadav, S., & Bandyopadhyay-Ghosh, S. (2026). Masked stereolithography-based additive manufacturing of radiopaque biocomposites for enhanced imaging in potential bio-implant applications. Journal of Reinforced Plastics and Composites. https://doi.org/10.1177/07316844261448744

Vancouver

Sardana G, Nemade KH, Vyas A, Ghosh SB, Segurola J, Yadav S, et al. Masked stereolithography-based additive manufacturing of radiopaque biocomposites for enhanced imaging in potential bio-implant applications. Journal of Reinforced Plastics and Composites. 2026. doi:10.1177/07316844261448744

BibTeX
@article{Sardana2026,
  author = {Sardana, Gourav and Nemade, Kanad Harshal and Vyas, Abhijit and Ghosh, Subrata Bandhu and Segurola, Juan and Yadav, Savinder and Bandyopadhyay-Ghosh, Sanchita},
  title = {Masked stereolithography-based additive manufacturing of radiopaque biocomposites for enhanced imaging in potential bio-implant applications},
  journal = {Journal of Reinforced Plastics and Composites},
  year = {2026},
  doi = {10.1177/07316844261448744}
}
Kostenlos starten →