EUVIMEDEUVIMED entdecken
Crossref

Impact-modified polyamide 11/carbon nanotubes 3D printing and potential enhancement of toughness in fiber reinforced polymers

Dalia Di Liberto, Arianna Tauro, Davide Perin, Isacco Savioli, Mirko Coser, Giulia Fredi, Daniele Rigotti, Andrea Dorigato, Alessandro Pegoretti

Journal of Reinforced Plastics and Composites · 2026-05 · 45 (9-10) · 2036-2050

DOI: 10.1177/07316844261421783 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Reinforced Plastics and Composites, online erschienen am 27.01.2026. Verfasst von Dalia Di Liberto und 8 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 73 Literaturangaben. Gefördert von: European Union - Next Generation EU - PNRR.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fused filament fabrication (FFF) of semi-crystalline polymers, such as polyamide 11 (PA11), is challenging due to significant shrinkage that occurs during cooling. This issue can be mitigated by blending the polymer with chemically compatible additives, which alter its rheological, thermal, and mechanical properties, thereby improving processability. In this study, we demonstrate the successful FFF printability of PA11 filaments modified with an ethylene–acrylic acid copolymer grafted with maleic anhydride (EAA-g-MAH) as an impact modifier. Carbon nanotubes (CNTs) were incorporated to compensate for the loss in terms of stiffness caused by the addition of EAA-g-MAH compound. Bulk compositions were prepared via melt compounding and compression molding and characterized, revealing that the addition of 20 wt% EAA-g-MAH increased the specific impact energy of PA11 by 282%. Two optimized impact-modified PA11 formulations—with and without CNTs—were subsequently extruded into filaments and, for the first time, successfully 3D printed through FFF. Mechanical testing demonstrated substantial improvements in ductility for the 3D-printed specimens, with increases of up to 56% for unfilled PA11 and 105% for CNT-reinforced PA11, relative to their bulk counterparts. This work opens new possibilities for directly printing tough polymers onto reinforcing fibers to create self-healing composites. Additionally, strong interfacial adhesion was achieved between glass fibers and the printed CNT-reinforced PA11, suggesting a potential increase in interlaminar toughness in fiber reinforced polymers (FRPs). These multifunctional materials processable via FFF represent a promising step toward the development of smart, self-healing structural composites.

Förderung

  • European Union - Next Generation EU - PNRR

Zitieren

APA

Liberto, D. D., Tauro, A., Perin, D., Savioli, I., Coser, M., Fredi, G., Rigotti, D., Dorigato, A., & Pegoretti, A. (2026). Impact-modified polyamide 11/carbon nanotubes 3D printing and potential enhancement of toughness in fiber reinforced polymers. Journal of Reinforced Plastics and Composites, 45(9-10), 2036-2050. https://doi.org/10.1177/07316844261421783

Vancouver

Liberto DD, Tauro A, Perin D, Savioli I, Coser M, Fredi G, et al. Impact-modified polyamide 11/carbon nanotubes 3D printing and potential enhancement of toughness in fiber reinforced polymers. Journal of Reinforced Plastics and Composites. 2026;45(9-10):2036-2050. doi:10.1177/07316844261421783

BibTeX
@article{Liberto2026,
  author = {Liberto, Dalia Di and Tauro, Arianna and Perin, Davide and Savioli, Isacco and Coser, Mirko and Fredi, Giulia and Rigotti, Daniele and Dorigato, Andrea and Pegoretti, Alessandro},
  title = {Impact-modified polyamide 11/carbon nanotubes 3D printing and potential enhancement of toughness in fiber reinforced polymers},
  journal = {Journal of Reinforced Plastics and Composites},
  year = {2026},
  volume = {45},
  number = {9-10},
  pages = {2036--2050},
  doi = {10.1177/07316844261421783}
}
Kostenlos starten →