EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Manufacturing composite laminates with controlled void content through process control

Iryna Tretiak, Luiz F Kawashita, Stephen R Hallett

Journal of Reinforced Plastics and Composites · 2024-01 · 43 (1-2) · 16-29

DOI: 10.1177/07316844231154585 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Reinforced Plastics and Composites, online erschienen am 11.02.2023. Verfasst von Iryna Tretiak und 2 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To investigate and evaluate the effect of void features on the mechanical performance of composite materials, it is important to be able to manufacture samples with a range of controlled void content. A criterion of less than 2% of porosity is typically acceptable for industry. However, it is important to investigate the effect of void content above and below this range, as voids are typically unevenly distributed in composite parts, and so there are likely to be local void concentrations higher than 2% in some sections of the structures. In this paper, a novel manufacturing process that allows panels with a range of void contents to be manufactured in a controlled manner is introduced. This allowed an investigation of the effect of manufacturing parameters, such as time, pressure and temperature and material systems on the void content and morphology of the voids in specimens produced.

Förderung

  • Engineering and Physical Sciences Research Council

Zitieren

APA

Tretiak, I., Kawashita, L. F., & Hallett, S. R. (2024). Manufacturing composite laminates with controlled void content through process control. Journal of Reinforced Plastics and Composites, 43(1-2), 16-29. https://doi.org/10.1177/07316844231154585

Vancouver

Tretiak I, Kawashita LF, Hallett SR. Manufacturing composite laminates with controlled void content through process control. Journal of Reinforced Plastics and Composites. 2024;43(1-2):16-29. doi:10.1177/07316844231154585

BibTeX
@article{Tretiak2024,
  author = {Tretiak, Iryna and Kawashita, Luiz F and Hallett, Stephen R},
  title = {Manufacturing composite laminates with controlled void content through process control},
  journal = {Journal of Reinforced Plastics and Composites},
  year = {2024},
  volume = {43},
  number = {1-2},
  pages = {16--29},
  doi = {10.1177/07316844231154585}
}
Kostenlos starten →