EUVIMEDEUVIMED entdecken
Crossref

3D printing of continuous fiber reinforced cellular structural composites for the study of bending performance

Ziying Cui, Xiayan Huang, Mengwei Jia, Mahyar Panahi-Sarmad, MD Imran Hossen, Ke Dong, Xueliang Xiao

Journal of Reinforced Plastics and Composites · 2023-07 · 42 (13-14) · 673-684

DOI: 10.1177/07316844221137017 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Reinforced Plastics and Composites, online erschienen am 17.11.2022. Verfasst von Ziying Cui und 6 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 32 Literaturangaben. Gefördert von: Fibre materials and products for emergency support and public safety, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Optimization of 3D printing factors has been the underlying issue for the last decade. Herein, a 3D-printing procedure was operated to fabricate continuous fiber-reinforced composites in various shape-filled cellular structures based on Kevlar fiber and polylactic acid The efficient processing parameters in bending performance have been systematically studied, such as printing path, fiber orientation, infill density, cell length, and layer thickness. A three-point bending test revealed that, as the effective density increased, there was an irrefutable rise in strength and stiffness of CFRCs with different infill structures. Structural parameters like cell length could improve bending performance; this effect was evaluated by adjusting the fiber orientations along the stretching direction. Furthermore, a finite element model was developed, and its results were verified with the experimental results. The sample of the rhombus-filled cellular CFRCs with a layer thickness of 0.1 mm was found to have the highest bending strength and modulus of 53.61 MPa and 2728.41 MPa, respectively. Since mechanical behavior mostly depends on numerous microstructural factors, plenty of prototypes should be designed to achieve the required bending strength and flexural modulus—this work is a pattern guide to reduce the number of printed samples.

Förderung

  • Fibre materials and products for emergency support and public safety
  • National Natural Science Foundation of China

Zitieren

APA

Cui, Z., Huang, X., Jia, M., Panahi-Sarmad, M., Hossen, M. I., Dong, K., & Xiao, X. (2023). 3D printing of continuous fiber reinforced cellular structural composites for the study of bending performance. Journal of Reinforced Plastics and Composites, 42(13-14), 673-684. https://doi.org/10.1177/07316844221137017

Vancouver

Cui Z, Huang X, Jia M, Panahi-Sarmad M, Hossen MI, Dong K, et al. 3D printing of continuous fiber reinforced cellular structural composites for the study of bending performance. Journal of Reinforced Plastics and Composites. 2023;42(13-14):673-684. doi:10.1177/07316844221137017

BibTeX
@article{Cui2023,
  author = {Cui, Ziying and Huang, Xiayan and Jia, Mengwei and Panahi-Sarmad, Mahyar and Hossen, MD Imran and Dong, Ke and Xiao, Xueliang},
  title = {3D printing of continuous fiber reinforced cellular structural composites for the study of bending performance},
  journal = {Journal of Reinforced Plastics and Composites},
  year = {2023},
  volume = {42},
  number = {13-14},
  pages = {673--684},
  doi = {10.1177/07316844221137017}
}
Kostenlos starten →