EUVIMEDEUVIMED entdecken
Crossref

Multiple Stress Creep Recovery of High-Polymer Modified Binders: Consideration of Temperature and Stress Sensitivity for Quality Assurance/Quality Control Policy Development

Mohamad Yaman Fares, Stefano Marini, Michele Lanotte

Transportation Research Record: Journal of the Transportation Research Board · 2024-11 · 2678 (11) · 312-328

DOI: 10.1177/03611981241240765 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Transportation Research Record: Journal of the Transportation Research Board, online erschienen am 23.04.2024. Verfasst von Mohamad Yaman Fares und 2 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 40 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High polymer-modified binders (HiPMBs) have recently been introduced in the Gulf region, where pavement structures are commonly subjected to severe climate conditions and heavy traffic loads because there is no enforcement of weight limits. Local agencies are currently modifying quality assurance/quality control (QA/QC) policies to accommodate such technology. In this study, HiPMBs produced by different refineries were subjected to physicochemical and thermal characterizations to investigate the compositional variability of industrial HiPMBs. Their thermal and stress susceptivity was then assessed through multiple stress creep recovery (MSCR) tests. The validation of the MSCR-based hierarchy was performed by assessing nine hot mix asphalts (HMAs) through repeated load permanent deformation tests and performing mechanistic-based structural analysis. Results showed that styrene-butadiene-styrene (SBS) is not the only modifier added to the bitumen, as commonly done in laboratory settings. These undisclosed modifiers disrupt the correlation between MSCR results and SBS concentration typically observed in laboratory-prepared HiPMBs, highlighting the importance of investigating plant-produced binders. Moreover, higher temperatures and stress levels returned different MSCR performance hierarchies among binders, questioning the effectiveness of the current MSCR test protocol for HiPMBs. Additionally, findings confirmed that the current MSCR testing protocol does not correctly assess the bitumen response in HMAs. A higher MSCR stress level shall be prescribed in the local QA/QC specifications to ensure the correct selection of HiPMBs in the region. This study can be used as a framework for other countries actively engaged in the implementation of HiPMBs and novel bituminous materials.

Zitieren

APA

Fares, M. Y., Marini, S., & Lanotte, M. (2024). Multiple Stress Creep Recovery of High-Polymer Modified Binders: Consideration of Temperature and Stress Sensitivity for Quality Assurance/Quality Control Policy Development. Transportation Research Record: Journal of the Transportation Research Board, 2678(11), 312-328. https://doi.org/10.1177/03611981241240765

Vancouver

Fares MY, Marini S, Lanotte M. Multiple Stress Creep Recovery of High-Polymer Modified Binders: Consideration of Temperature and Stress Sensitivity for Quality Assurance/Quality Control Policy Development. Transportation Research Record: Journal of the Transportation Research Board. 2024;2678(11):312-328. doi:10.1177/03611981241240765

BibTeX
@article{Fares2024,
  author = {Fares, Mohamad Yaman and Marini, Stefano and Lanotte, Michele},
  title = {Multiple Stress Creep Recovery of High-Polymer Modified Binders: Consideration of Temperature and Stress Sensitivity for Quality Assurance/Quality Control Policy Development},
  journal = {Transportation Research Record: Journal of the Transportation Research Board},
  year = {2024},
  volume = {2678},
  number = {11},
  pages = {312--328},
  doi = {10.1177/03611981241240765}
}
Kostenlos starten →