EUVIMEDEUVIMED entdecken
Crossref

Multifunctional performance of ceramic reinforced magnesium metal matrix composites through microstructural engineering and thermal analysis

S. Navaneethasanthakumar, Mohammad Attalique Rabbani, Sabbina SuryaSaranya, NPR Abdul

The Journal of Strain Analysis for Engineering Design · 16.11.2026

DOI: 10.1177/03093247261506382 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of Strain Analysis for Engineering Design, online erschienen am 16.11.2026. Verfasst von S. Navaneethasanthakumar und 3 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research analysis the effect of zirconium nitride (ZrN) reinforcement on the mechanical, tribological, microstructural, and thermophysical characteristics of the AZ80 magnesium alloy-based metal matrix composite. The composites made with 0, 3, 6, and 9 wt.% ZrN were analyzed by scanning electron microscopy (SEM), energy-dispersive spectroscopy, mechanical testing, dry sliding wear testing, and laser flash analysis (LFA). The hardness, flexural strength, tensile strength, yield strength of the composites progressively increased with increasing ZrN content, whereas elongation decreased. The hardness and ultimate tensile strength values at 9 wt. % ZrN were 110 ± 4 VHN and 305 ± 8 MPa, respectively, which are higher than those obtained for the unreinforced alloy (68 ± 2 VHN and 210 ± 5 MPa). The wear rate and coefficient of friction were also significantly reduced to 2.1 × 10 −6 mm 3 /N·m and 0.31, respectively, at a load of 10 N. Microstructure analysis showed that with the increase in ZrN content, there was an improvement in the distribution of the reinforcements and the interaction between the matrix and the particles. The proposed model has a lower error rate, with an Mean Squared Error (MSE) of 0.02, an Mean Absolute Error (MAE) of 0.04, and an Root Mean Square Error (RMSE) of 0.08. The results show that AZ80 composites reinforced with ZrN are promising materials for lightweight structural applications where improved strength and wear resistance are required.

Zitieren

APA

Navaneethasanthakumar, S., Rabbani, M. A., SuryaSaranya, S., & Abdul, N. (2026). Multifunctional performance of ceramic reinforced magnesium metal matrix composites through microstructural engineering and thermal analysis. The Journal of Strain Analysis for Engineering Design. https://doi.org/10.1177/03093247261506382

Vancouver

Navaneethasanthakumar S, Rabbani MA, SuryaSaranya S, Abdul N. Multifunctional performance of ceramic reinforced magnesium metal matrix composites through microstructural engineering and thermal analysis. The Journal of Strain Analysis for Engineering Design. 2026. doi:10.1177/03093247261506382

BibTeX
@article{Navaneethasanthakumar2026,
  author = {Navaneethasanthakumar, S. and Rabbani, Mohammad Attalique and SuryaSaranya, Sabbina and Abdul, NPR},
  title = {Multifunctional performance of ceramic reinforced magnesium metal matrix composites through microstructural engineering and thermal analysis},
  journal = {The Journal of Strain Analysis for Engineering Design},
  year = {2026},
  doi = {10.1177/03093247261506382}
}
Kostenlos starten →