Integrated mechanical and fracture characterization of a structural adhesive using digital image correlation for cohesive zone modeling
The Journal of Strain Analysis for Engineering Design · 20.11.2026
DOI: 10.1177/03093247261501483 ↗Kurz gefasst
Fachartikel in der Zeitschrift The Journal of Strain Analysis for Engineering Design, online erschienen am 20.11.2026. Verfasst von Elanur Çelebi Kavdır und 1 weiteren Autor:innen. Die Arbeit nennt 66 Literaturangaben.
Abstract (Originalsprache)
The widespread use of adhesive bonding in critical engineering applications necessitates the accurate characterization of the mechanical and fracture properties of structural adhesives. Although Digital Image Correlation (DIC) has been extensively employed for full-field deformation measurements, its use as an integrated experimental tool for comprehensive adhesive characterization remains limited. In this study, DIC is employed as a unified experimental framework for determining the mechanical properties, fracture energies, and Cohesive Zone Model (CZM) parameters of a structural adhesive. Bulk adhesive specimens manufactured under vacuum conditions were subjected to uniaxial tensile and Iosipescu shear tests to determine their elastic and shear behavior. Fracture tests were subsequently performed on bonded specimens, with crack-tip separation, adherend rotation, and crack length determined using the same non-contact optical measurement system. Based on these measurements, the energy release rate and J-integral were evaluated, and traction–separation relationships required for CZM implementation were derived. The results showed good agreement between the fracture parameters obtained using different fracture mechanics approaches. The main contribution of this study is the demonstration that the mechanical properties, fracture parameters, and CZM parameters of a structural adhesive can be consistently determined within a single DIC-based experimental methodology.
Zitieren
APA
Kavdır, E. Ç., & Aydın, M. D. (2026). Integrated mechanical and fracture characterization of a structural adhesive using digital image correlation for cohesive zone modeling. The Journal of Strain Analysis for Engineering Design. https://doi.org/10.1177/03093247261501483
Vancouver
Kavdır EÇ, Aydın MD. Integrated mechanical and fracture characterization of a structural adhesive using digital image correlation for cohesive zone modeling. The Journal of Strain Analysis for Engineering Design. 2026. doi:10.1177/03093247261501483
BibTeX
@article{Kavdr2026,
author = {Kavdır, Elanur Çelebi and Aydın, Murat Demir},
title = {Integrated mechanical and fracture characterization of a structural adhesive using digital image correlation for cohesive zone modeling},
journal = {The Journal of Strain Analysis for Engineering Design},
year = {2026},
doi = {10.1177/03093247261501483}
}
EUVIMED