EUVIMEDEUVIMED entdecken
Crossref

Front face strain compliance for quantification of short crack growth in fatigue testing

Hasan Saeed, Somsubhro Chaudhuri, Wim De Waele

The Journal of Strain Analysis for Engineering Design · 2023-11 · 58 (8) · 649-660

DOI: 10.1177/03093247231173741 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of Strain Analysis for Engineering Design, online erschienen am 13.05.2023. Verfasst von Hasan Saeed und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 34 Literaturangaben. Gefördert von: Federale Overheidsdienst Economie, KMO, Middenstand en Energie.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Short fatigue crack growth investigation is of considerable scientific interest as it comprises a significant portion of the total fatigue life of a structure. It is very challenging to accurately quantify this stage of fatigue crack growth experimentally. In this article, a novel front face strain compliance technique for single-edge notched specimens subjected to four-point bending is proposed. Finite element analysis is performed to determine the correlation between crack length and strain change near the crack. This relationship is then validated by experiments in which strains are measured by strain gauges attached near the short crack, and crack length is quantified by examining beachmark lines at the fracture surfaces. Based on the numerical and experimental results, it is concluded that the strain measured near the notch allows quantifying short crack growth for normalised crack lengths in the range 0.01 ≤ a/W ≤ 0.06 ( a/W being the ratio of crack length over specimen width). A compliance equation based on the front face strain is finally presented.

Förderung

  • Federale Overheidsdienst Economie, KMO, Middenstand en Energie

Zitieren

APA

Saeed, H., Chaudhuri, S., & Waele, W. D. (2023). Front face strain compliance for quantification of short crack growth in fatigue testing. The Journal of Strain Analysis for Engineering Design, 58(8), 649-660. https://doi.org/10.1177/03093247231173741

Vancouver

Saeed H, Chaudhuri S, Waele WD. Front face strain compliance for quantification of short crack growth in fatigue testing. The Journal of Strain Analysis for Engineering Design. 2023;58(8):649-660. doi:10.1177/03093247231173741

BibTeX
@article{Saeed2023,
  author = {Saeed, Hasan and Chaudhuri, Somsubhro and Waele, Wim De},
  title = {Front face strain compliance for quantification of short crack growth in fatigue testing},
  journal = {The Journal of Strain Analysis for Engineering Design},
  year = {2023},
  volume = {58},
  number = {8},
  pages = {649--660},
  doi = {10.1177/03093247231173741}
}
Kostenlos starten →