Research on hydrogen-based direct reduction sticking and inhibition methods for vanadium–titanium pellets
Ironmaking & Steelmaking: Processes, Products and Applications · 26.06.2026
DOI: 10.1177/03019233261463816 ↗Kurz gefasst
Fachartikel in der Zeitschrift Ironmaking & Steelmaking: Processes, Products and Applications, online erschienen am 26.06.2026. Verfasst von Yue-lin Qin und 8 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Gefördert von: Science and Technology Innovation Key R&D Program of Chongqing, China, the State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, the Chongqing Natural Science Foundation Innovation Development Joint Fund.
Abstract (Originalsprache)
Hydrogen-based shaft furnaces use hydrogen instead of coke and are regarded as a key route for low-carbon steel production. However, under high-temperature direct reduction conditions, sticking of direct reduced iron may occur, which deteriorates bed permeability and affects production stability. In this study, reduction-under-load tests were conducted to simulate the atmosphere of a hydrogen-based shaft furnace and to investigate the effects of total reduction time, temperature, and coating materials (CaO, MgO, TiO 2 ) on the sticking behavior of vanadium–titanium pellets. The results show that sticking was strongly affected by reduction time at 1100 °C. When the total reduction time reached 2.5 h, the sticking index and sticking strength reached their maximum values of 97.11% and 16.23 N, respectively, and then decreased with further extension of time, while the metallization rate gradually declined. Increasing temperature markedly intensified sticking behavior, whereas the metallization rate changed little. Among the coating materials, TiO 2 exhibited the strongest inhibitory effect by forming a dense barrier layer and Fe–Ti–O interfacial products that reduced direct particle contact and suppressed the development of sticking phases.
Förderung
- Science and Technology Innovation Key R&D Program of Chongqing, China
- the State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing
- the Chongqing Natural Science Foundation Innovation Development Joint Fund
- Chongqing Municipal Education Commission Science and Technology Research Project
Zitieren
APA
Qin, Y., Zhu, Y., Deng, Y., He, W., Liu, H., Zhang, M., Liu, G., Li, H., & Jing, Z. (2026). Research on hydrogen-based direct reduction sticking and inhibition methods for vanadium–titanium pellets. Ironmaking & Steelmaking: Processes, Products and Applications. https://doi.org/10.1177/03019233261463816
Vancouver
Qin Y, Zhu Y, Deng Y, He W, Liu H, Zhang M, et al. Research on hydrogen-based direct reduction sticking and inhibition methods for vanadium–titanium pellets. Ironmaking & Steelmaking: Processes, Products and Applications. 2026. doi:10.1177/03019233261463816
BibTeX
@article{Qin2026,
author = {Qin, Yue-lin and Zhu, Ying and Deng, Yin and He, Wen-chao and Liu, Hao and Zhang, Min-juan and Liu, Gang and Li, Hong-liang and Jing, Zong-jie},
title = {Research on hydrogen-based direct reduction sticking and inhibition methods for vanadium–titanium pellets},
journal = {Ironmaking & Steelmaking: Processes, Products and Applications},
year = {2026},
doi = {10.1177/03019233261463816}
}
EUVIMED