Effect of rare earth cerium on inclusions, microstructure and mechanical properties in high-strength rebar
Ironmaking & Steelmaking: Processes, Products and Applications · 28.04.2026
DOI: 10.1177/03019233261446007 ↗Kurz gefasst
Fachartikel in der Zeitschrift Ironmaking & Steelmaking: Processes, Products and Applications, online erschienen am 28.04.2026. Verfasst von Xiaomin Zhao und 1 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben.
Abstract (Originalsprache)
High-temperature smelting, rolling, and room-temperature tensile testing were conducted on high-strength rebar steels containing 0∼0.01% rare earth cerium. The rolling start temperature is 1128°C∼1160°C and the rolling start temperature for pass nine is 840°C∼850°C. The carbon/sulfur analyzer, oxygen/nitrogen determinator, inductively coupled plasma mass spectrometer and scanning electron microscopy with energy-dispersive spectroscopy were employed to detect steel composition. With increasing Ce amounts, inclusions were primarily composed of MnS, accompanied by oxides/ sulfides, as well as their MnS-complex counterparts, which is consistent with thermodynamic predictions. The addition of cerium significantly promoted ferrite formation. In the steel without Ce, the ferrite fraction was relatively low at 29.9%, whereas the steel with 0.01% Ce exhibited the highest ferrite content at 37.3%. Trace amounts of Ce facilitated grain refinement by forming Ce-Al-O inclusions, which served as nucleation sites for austenite. The Ce-Al-O inclusions also contributed to the precipitation of VN, enhancing ferrite formation and achieving an optimized balance between strength (874 MPa) and toughness (17.88%). However, excessive cerium content adversely affected steel cleanliness, leading to the formation of coarse Ce-O-S inclusions that compromised elongation to 7.37%.
Zitieren
APA
Zhao, X., & Wang, X. (2026). Effect of rare earth cerium on inclusions, microstructure and mechanical properties in high-strength rebar. Ironmaking & Steelmaking: Processes, Products and Applications. https://doi.org/10.1177/03019233261446007
Vancouver
Zhao X, Wang X. Effect of rare earth cerium on inclusions, microstructure and mechanical properties in high-strength rebar. Ironmaking & Steelmaking: Processes, Products and Applications. 2026. doi:10.1177/03019233261446007
BibTeX
@article{Zhao2026,
author = {Zhao, Xiaomin and Wang, Xuemin},
title = {Effect of rare earth cerium on inclusions, microstructure and mechanical properties in high-strength rebar},
journal = {Ironmaking & Steelmaking: Processes, Products and Applications},
year = {2026},
doi = {10.1177/03019233261446007}
}
EUVIMED