EUVIMEDEUVIMED entdecken
Crossref

Temperature-dependent permeability of sinter and pellets under hydrogen-rich conditions for lumpy zone in the blast furnace

Ramin Rabani, Thomas Koedinger, Hubert Fouarge, Barbara Dornelas, Frédéric van Loo, Bernard Vanderheyden

Ironmaking & Steelmaking: Processes, Products and Applications · 04.03.2026

DOI: 10.1177/03019233261428812 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Ironmaking & Steelmaking: Processes, Products and Applications, online erschienen am 04.03.2026. Verfasst von Ramin Rabani und 5 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben. Gefördert von: Research Fund for Coal and Steel.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

While increasing hydrogen share in the reducing gas represents an attractive path for reducing CO 2 ; emissions in blast furnace ironmaking, its effects on burden permeability remain poorly understood. This study systematically examines how hydrogen-enriched atmospheres affect the permeability of iron ore sinter and pellets across the lumpy zone temperature range (300–1100 °C). To isolate intrinsic hydrogen effects and establish performance boundaries, samples were reduced at three representative temperatures (500, 800, and 1000 °C) under pure gas compositions (100% CO, 60% CO-40% H 2 , and 100% H 2 ), followed by degradation and quantitative permeability analysis. Results show material-specific responses: Hydrogen improves sinter permeability by over an order of magnitude at 500 °C by suppressing carbon deposition, while pellets achieve optimal performance at 800 °C but deteriorate severely at 1000 °C under hydrogen-rich conditions. The middle lumpy zone (600–900 °C) emerges as the most favourable region for hydrogen injection, where both materials maintain adequate permeability while enabling CO 2 emission reductions. The study provides quantitative permeability parameters ( K , β) for computational modelling and strategic guidance for burden-specific hydrogen injection optimization, though alternative materials may exhibit different behaviours.

Förderung

  • Research Fund for Coal and Steel

Zitieren

APA

Rabani, R., Koedinger, T., Fouarge, H., Dornelas, B., Loo, F. V., & Vanderheyden, B. (2026). Temperature-dependent permeability of sinter and pellets under hydrogen-rich conditions for lumpy zone in the blast furnace. Ironmaking & Steelmaking: Processes, Products and Applications. https://doi.org/10.1177/03019233261428812

Vancouver

Rabani R, Koedinger T, Fouarge H, Dornelas B, Loo FV, Vanderheyden B. Temperature-dependent permeability of sinter and pellets under hydrogen-rich conditions for lumpy zone in the blast furnace. Ironmaking & Steelmaking: Processes, Products and Applications. 2026. doi:10.1177/03019233261428812

BibTeX
@article{Rabani2026,
  author = {Rabani, Ramin and Koedinger, Thomas and Fouarge, Hubert and Dornelas, Barbara and Loo, Frédéric van and Vanderheyden, Bernard},
  title = {Temperature-dependent permeability of sinter and pellets under hydrogen-rich conditions for lumpy zone in the blast furnace},
  journal = {Ironmaking & Steelmaking: Processes, Products and Applications},
  year = {2026},
  doi = {10.1177/03019233261428812}
}
Kostenlos starten →