EUVIMEDEUVIMED entdecken
Crossref

Research on process parameters of homogenised continuous casting for GCr15 bearing steel bloom

Pei Xu, Huasong Liu, Bingjun Lu, Deyong Wang, Dong Pan, Yu Zhang, Yang Wang, Xiang Yu Zhang

Ironmaking & Steelmaking: Processes, Products and Applications · 25.07.2026

DOI: 10.1177/03019233251349877 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Ironmaking & Steelmaking: Processes, Products and Applications, online erschienen am 25.07.2026. Verfasst von Pei Xu und 7 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Gefördert von: the Group Major Projects in Ansteel Beijing Research Institute, the Regional Company Projects in Ansteel Beijing Research Institute.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A solidification and heat transfer model was established to analyse quantitatively the influence of process parameters on solidification behaviour during bloom continuous casting (CC), and then the appropriate process parameters for homogenised CC were determined through systematically considering soft/heavy reduction (SR/HR), final electromagnetic stirring (F-EMS), shell thickness and temperature re-rising of secondary cooling zone (SCZ). Results indicate that solute element is prone to enrich towards the bloom's centre when liquid core is a slender conical shape. And casting speed needs to be controlled within 0.450 m/min < V < 0.478 m/min for making seven HR rollers be in liquid core reduction and the corresponding solidification rate of F-EMS is F S = 0.65∼0.69, namely, both key processes are in suitable operating ranges. Moreover, the shell thickness of mould outlet is about 13.51∼17.81 mm and the maximum re-rising temperature in the SCZ is 121°C, and consequently neither of them will affect the strand quality. Eventually, the appropriate control strategies of process parameters for homogenised CC are 0.46 m/min or 0.47 m/min in casting speed, superheat of 20∼30°C, 0.125 L/kg in water ratio and running one reduction rollers, and so corresponding solid fractions f s = 0.43∼1.0 (0.46 m/min) and f s = 0.41∼1.0 (0.47 m/min) in the SR/HR region are more reasonable. Finally, centre segregation was reduced from 1.18 to 1.09 in industrial production.

Förderung

  • the Group Major Projects in Ansteel Beijing Research Institute
  • the Regional Company Projects in Ansteel Beijing Research Institute

Zitieren

APA

Xu, P., Liu, H., Lu, B., Wang, D., Pan, D., Zhang, Y., Wang, Y., & Zhang, X. Y. (2026). Research on process parameters of homogenised continuous casting for GCr15 bearing steel bloom. Ironmaking & Steelmaking: Processes, Products and Applications. https://doi.org/10.1177/03019233251349877

Vancouver

Xu P, Liu H, Lu B, Wang D, Pan D, Zhang Y, et al. Research on process parameters of homogenised continuous casting for GCr15 bearing steel bloom. Ironmaking & Steelmaking: Processes, Products and Applications. 2026. doi:10.1177/03019233251349877

BibTeX
@article{Xu2026,
  author = {Xu, Pei and Liu, Huasong and Lu, Bingjun and Wang, Deyong and Pan, Dong and Zhang, Yu and Wang, Yang and Zhang, Xiang Yu},
  title = {Research on process parameters of homogenised continuous casting for GCr15 bearing steel bloom},
  journal = {Ironmaking & Steelmaking: Processes, Products and Applications},
  year = {2026},
  doi = {10.1177/03019233251349877}
}
Kostenlos starten →