EUVIMEDEUVIMED entdecken
Crossref

The influence of chemical composition optimisation of advanced high-strength steel on liquid metal embrittlement phenomenon

Xue Bai, Yun Han, Guangrui Jiang, Huasai Liu, Huaxiang Teng

Ironmaking & Steelmaking: Processes, Products and Applications · 2026-11 · 53 (9) · 1847-1854

DOI: 10.1177/03019233251345986 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Ironmaking & Steelmaking: Processes, Products and Applications, online erschienen am 24.06.2025. Verfasst von Xue Bai und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 37 Literaturangaben. Gefördert von: Shougang Research Institute of Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study focuses on the element effects of Al and Si on the liquid metal embrittlement (LME) phenomenon. Four series of chemical compositions have been chosen for this research, which are 20% higher Al DH780, 20% higher Si DH780, 20% higher Al DH980, and 20% higher Si DH980. The total LME crack length of the welding spot of each state sample has been statistically analysed. The high Al DH780 sample shows the lowest total crack length, whereas the high Si DH980 sample shows the highest total crack length. Then the semi-in situ tensile tests have also been employed to evaluate the mechanical properties of these four different chemical composition samples. The high Al sample shows less LME cracks and higher elongation compared with the high Si sample. The shoulder position transmission electron microscopy (TEM) sample has been cut by the focused ion beam. It could be seen from the TEM observation that the distribution of Si element is close to that of Zn. The Si and Al solute atoms would diffuse towards grain boundaries to form solute-rich clusters in the manner of solute-vacancies loops. The stronger Zn-Si adhesion bonding attracts Zn infiltrating deeper into substrate. The Zn-rich intermetallic phase nucleation on grain boundaries would further worsen the LME sensitivity. The enrichment of Al content would repel Zn on grain boundaries and also stabilise the Fe-Zn intermetallic phase. High Al could also reduce the austenite amount in steel. Thus, it mitigates the LME response of steel. The LME phenomenon of Zn would be severe for the higher Si sample.

Förderung

  • Shougang Research Institute of Technology

Zitieren

APA

Bai, X., Han, Y., Jiang, G., Liu, H., & Teng, H. (2026). The influence of chemical composition optimisation of advanced high-strength steel on liquid metal embrittlement phenomenon. Ironmaking & Steelmaking: Processes, Products and Applications, 53(9), 1847-1854. https://doi.org/10.1177/03019233251345986

Vancouver

Bai X, Han Y, Jiang G, Liu H, Teng H. The influence of chemical composition optimisation of advanced high-strength steel on liquid metal embrittlement phenomenon. Ironmaking & Steelmaking: Processes, Products and Applications. 2026;53(9):1847-1854. doi:10.1177/03019233251345986

BibTeX
@article{Bai2026,
  author = {Bai, Xue and Han, Yun and Jiang, Guangrui and Liu, Huasai and Teng, Huaxiang},
  title = {The influence of chemical composition optimisation of advanced high-strength steel on liquid metal embrittlement phenomenon},
  journal = {Ironmaking & Steelmaking: Processes, Products and Applications},
  year = {2026},
  volume = {53},
  number = {9},
  pages = {1847--1854},
  doi = {10.1177/03019233251345986}
}
Kostenlos starten →