EUVIMEDEUVIMED entdecken
Crossref

Effect of MgO on viscosity and melt structure of mold flux for continuous casting

Xiong Yan, Wanlin Wang, Lejun Zhou, Yang Yang, Hongliang Lin, Xiaokang Liu

Ironmaking & Steelmaking: Processes, Products and Applications · 2024-04 · 51 (3) · 262-270

DOI: 10.1177/03019233231217579 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Ironmaking & Steelmaking: Processes, Products and Applications, online erschienen am 30.01.2024. Verfasst von Xiong Yan und 5 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 40 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The viscosity and structure of mold flux with different MgO content were investigated in this study. Results show that the viscosity at 1583 K reduces from 0.39 to 0.35 Pa·s, and the apparent activation energy decreases from 135.13 ± 3.78 to 69.53 ± 2.88 kJ/mol with the addition of MgO from 2 to 8 wt-%. Melt structure analyses suggest that the amount of more complex structural units, such as Q 3 (Si), Q 4 (Si), Si–O–Si and Al–O–Si decrease, meanwhile the simpler Q 0 (Si), Q 1 (Si) and Q 2 (Si) increase with increasing MgO content in the melt. However, [AlO 4 ] 5− symmetric tetrahedral increases, while [AlO 4 ] 5− asymmetric tetrahedral decreases with the addition of MgO due to the charge compensation effect. Finally, from the synthetic analyses of viscosity and melt structure, it can be concluded that the network breaker effect of O 2− from MgO is much larger than the charge compensation effect of Mg 2+ from MgO, which results in the reduction of viscosity and apparent activation energy of the mold flux melt.

Zitieren

APA

Yan, X., Wang, W., Zhou, L., Yang, Y., Lin, H., & Liu, X. (2024). Effect of MgO on viscosity and melt structure of mold flux for continuous casting. Ironmaking & Steelmaking: Processes, Products and Applications, 51(3), 262-270. https://doi.org/10.1177/03019233231217579

Vancouver

Yan X, Wang W, Zhou L, Yang Y, Lin H, Liu X. Effect of MgO on viscosity and melt structure of mold flux for continuous casting. Ironmaking & Steelmaking: Processes, Products and Applications. 2024;51(3):262-270. doi:10.1177/03019233231217579

BibTeX
@article{Yan2024,
  author = {Yan, Xiong and Wang, Wanlin and Zhou, Lejun and Yang, Yang and Lin, Hongliang and Liu, Xiaokang},
  title = {Effect of MgO on viscosity and melt structure of mold flux for continuous casting},
  journal = {Ironmaking & Steelmaking: Processes, Products and Applications},
  year = {2024},
  volume = {51},
  number = {3},
  pages = {262--270},
  doi = {10.1177/03019233231217579}
}
Kostenlos starten →