EUVIMEDEUVIMED entdecken
Crossref

Microstructure of alumina layers formed by PEO with PEG additive

Marcel Wetegrove, Harm Wulff, Angela Kruth

Surface Engineering · 06.11.2026

DOI: 10.1177/02670844261505580 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Surface Engineering, online erschienen am 06.11.2026. Verfasst von Marcel Wetegrove und 2 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Gefördert von: German Federal Ministry for Economic Affairs and Climate Action, IGF.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study addresses a knowledge gap by providing depth-resolved analysis of the phase compositions and crystallite sizes within surface layers formed by plasma electrolytic oxidation (PEO) on AlMg3 (EN AW-5754) alloy while comparing effects of different amounts of Polyethylene Glycol (PEG) additive. Structural characterization includes Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), 3D surface contour scans and Grazing Incidence X-ray Diffraction (GIXRD). Crystallographic investigations reveal a compositional gradient in the coating containing both η -Al 2 O 3 and metallic Al, while PEG addition leads to smaller crystallites in the η -Al 2 O 3 phase. TEM investigations confirm the presence of both η -Al 2 O 3 and metallic Al within the layer. Cross-sectional analyses display a clear interface between the substrate and coating. Surface morphology changes were observed, indicating a reduction of surface roughness induced by the additive, which is accompanied by increased layer thickness uniformity and reduced porosity. PEG’s potential in fine-tuning the oxide layer’s morphology and microstructure to reduce roughness while improving homogeneity and maintaining a crystalline Al 2 O 3 layer is demonstrated.

Förderung

  • German Federal Ministry for Economic Affairs and Climate Action, IGF

Zitieren

APA

Wetegrove, M., Wulff, H., & Kruth, A. (2026). Microstructure of alumina layers formed by PEO with PEG additive. Surface Engineering. https://doi.org/10.1177/02670844261505580

Vancouver

Wetegrove M, Wulff H, Kruth A. Microstructure of alumina layers formed by PEO with PEG additive. Surface Engineering. 2026. doi:10.1177/02670844261505580

BibTeX
@article{Wetegrove2026,
  author = {Wetegrove, Marcel and Wulff, Harm and Kruth, Angela},
  title = {Microstructure of alumina layers formed by PEO with PEG additive},
  journal = {Surface Engineering},
  year = {2026},
  doi = {10.1177/02670844261505580}
}
Kostenlos starten →