EUVIMEDEUVIMED entdecken
Crossref

Effects of nano-TiN addition on annular-oscillating laser-clad Ti6Al4V coatings

Rui Li, Hongtao Hu, Jintao Wen, Tao Wang

Surface Engineering · 2026-11 · 42 (11) · 1144-1155

DOI: 10.1177/02670844261500316 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Surface Engineering, online erschienen am 19.10.2026. Verfasst von Rui Li und 3 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Gefördert von: the Aeronautical Science Foundation of China, Joint Funds of the Natural Science Foundation of Tianjin, the Central Universities of Civil Aviation University of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With increasing demands for wear-resistant titanium alloy components in aerospace applications, surface engineering routes that combine ceramic reinforcement with laser-based thermal-field regulation are attracting growing attention. In this work, annular-oscillating laser cladding was employed to deposit Nano-TiN/Ti6Al4V composite coatings containing 0, 1, 6 and 12 wt.% TiN on Ti6Al4V substrates. The study focuses on how Nano-TiN addition modifies the phase constitution, microstructural evolution, microhardness and sliding wear response of the coatings. The results indicate that Nano-TiN promotes microstructural refinement and increases coating hardness, providing an important basis for improving the surface load-bearing capacity of Ti6Al4V. When the Nano-TiN addition was 1, 6 and 12 wt.%, the microhardness increased by 18.5%, 44.1% and 57.3%, respectively, relative to the TiN-free coating. However, the wear resistance showed an initial increase followed by a decline, and the coating containing 6 wt.% TiN exhibited the optimum wear resistance, with a 27.9% reduction in wear volume relative to the TiN-free coating. A suitable Nano-TiN addition improves the load-bearing capacity of the surface layer through microstructural refinement and hard-phase strengthening, whereas excessive Nano-TiN causes particle enrichment and agglomeration, promoting particle pull-out and third-body abrasive wear, and thus reduce wear resistance. These results indicate that annular-oscillating laser cladding combined with an appropriate Nano-TiN addition provides a practical route for designing wear-resistant Ti6Al4V surface coatings.

Förderung

  • the Aeronautical Science Foundation of China
  • Joint Funds of the Natural Science Foundation of Tianjin
  • the Central Universities of Civil Aviation University of China
  • the Key Project of the Civil Aviation Joint Fund of the National Natural Science Foundation of China

Zitieren

APA

Li, R., Hu, H., Wen, J., & Wang, T. (2026). Effects of nano-TiN addition on annular-oscillating laser-clad Ti6Al4V coatings. Surface Engineering, 42(11), 1144-1155. https://doi.org/10.1177/02670844261500316

Vancouver

Li R, Hu H, Wen J, Wang T. Effects of nano-TiN addition on annular-oscillating laser-clad Ti6Al4V coatings. Surface Engineering. 2026;42(11):1144-1155. doi:10.1177/02670844261500316

BibTeX
@article{Li2026,
  author = {Li, Rui and Hu, Hongtao and Wen, Jintao and Wang, Tao},
  title = {Effects of nano-TiN addition on annular-oscillating laser-clad Ti6Al4V coatings},
  journal = {Surface Engineering},
  year = {2026},
  volume = {42},
  number = {11},
  pages = {1144--1155},
  doi = {10.1177/02670844261500316}
}
Kostenlos starten →