Cryogenic processing for enhanced mechanical strength and corrosion resistance in DSS2205
Surface Engineering · 2026-07 · 42 (7) · 734-744
DOI: 10.1177/02670844261460151 ↗Kurz gefasst
Fachartikel in der Zeitschrift Surface Engineering, online erschienen am 16.06.2026. Verfasst von Roshan Kuruvila und 3 weiteren Autor:innen. Die Arbeit nennt 50 Literaturangaben.
Abstract (Originalsprache)
This study investigates the influence of Deep Cryogenic Treatment (DCT) on the mechanical and electrochemical properties of duplex stainless steel DSS2205 subjected to treatment durations of 3, 6, and 24 h. The results reveal distinct variations in mechanical performance following cryogenic treatment. Tensile strength and hardness increased progressively for the 3 h and 6 h DCT conditions, reaching maximum improvements of approximately 6% and 8%, respectively, at 6 h; however, the 24 h treatment exhibited slightly reduced gains. All DCT durations led to a marginal decrease in impact toughness, as evidenced by a reduction in absorbed impact energy, indicating a trade-off between strengthening and toughness. Electrochemical corrosion studies demonstrated a substantial enhancement in corrosion resistance, with the corrosion rate reduced by up to 98.5% in the 6 h treated condition, attributed to improved passivation behavior. Overall, the findings suggest that DCT can serve as an effective and cost-efficient post-processing technique to enhance the strength and corrosion resistance of DSS2205, provided that the treatment duration is carefully optimized to avoid excessive deterioration in toughness. These findings indicate the potential applicability of deep cryogenic treatment for selected industrial environments where improved strength and corrosion resistance are required.
Zitieren
APA
Kuruvila, R., Saju, J., Harilal, M., & Sundaresan, T. K. (2026). Cryogenic processing for enhanced mechanical strength and corrosion resistance in DSS2205. Surface Engineering, 42(7), 734-744. https://doi.org/10.1177/02670844261460151
Vancouver
Kuruvila R, Saju J, Harilal M, Sundaresan TK. Cryogenic processing for enhanced mechanical strength and corrosion resistance in DSS2205. Surface Engineering. 2026;42(7):734-744. doi:10.1177/02670844261460151
BibTeX
@article{Kuruvila2026,
author = {Kuruvila, Roshan and Saju, Jojo and Harilal, Manu and Sundaresan, Thirumalai Kumaran},
title = {Cryogenic processing for enhanced mechanical strength and corrosion resistance in DSS2205},
journal = {Surface Engineering},
year = {2026},
volume = {42},
number = {7},
pages = {734--744},
doi = {10.1177/02670844261460151}
}
EUVIMED