Post-spray heat treatment of cold-sprayed coatings: A review
Surface Engineering · 2026-06 · 42 (6) · 605-621
DOI: 10.1177/02670844261456039 ↗Kurz gefasst
Fachartikel in der Zeitschrift Surface Engineering, online erschienen am 01.06.2026. Verfasst von Diki Dwi Pramono und 3 weiteren Autor:innen. Die Arbeit nennt 130 Literaturangaben. Gefördert von: Universitas Negeri Malang.
Abstract (Originalsprache)
Cold spray is a solid-state coating and repair technology that limits melting-related oxidation and grain coarsening; however, as-sprayed deposits can contain residual porosity, high residual stresses, and weak interparticle interfaces that restrict mechanical reliability. This review surveys post-spray heat treatment (PSHT) routes reported for cold-sprayed coatings, with primary emphasis on annealing/ageing and induction-based heating, while more limited HIP-related evidence is discussed where relevant. PSHT strengthens deposits primarily through diffusion-assisted consolidation, pore closure, and recovery/recrystallization that convert mechanically interlocked contacts into more continuous metallurgical bonds. Reported outcomes include higher interparticle/adhesive strength, improved tensile strength–ductility balance, tailored hardness (system-dependent), and enhanced fatigue and wear resistance; in some alloys, atmosphere control during PSHT plays an important role in governing interfacial stability and overall coating integrity. The evidence shows strong material dependence: precipitation-hardenable aluminum alloys benefit from moderate ageing schedules, whereas titanium alloys require higher-temperature treatments to maximize strength–ductility synergy but may soften due to loss of cold-work. Excessive temperatures or air exposure can trigger oxidation, intermetallic formation, and grain coarsening, underscoring the need for system-specific process windows. Key gaps include standardized reporting and long-term durability data under combined corrosion–thermal cycling–fatigue loading, and multivariate optimization linking spray conditions with PSHT.
Förderung
- Universitas Negeri Malang
Zitieren
APA
Pramono, D. D., Puspitasari, P., Suryanto, H., & Omar, N. I. (2026). Post-spray heat treatment of cold-sprayed coatings: A review. Surface Engineering, 42(6), 605-621. https://doi.org/10.1177/02670844261456039
Vancouver
Pramono DD, Puspitasari P, Suryanto H, Omar NI. Post-spray heat treatment of cold-sprayed coatings: A review. Surface Engineering. 2026;42(6):605-621. doi:10.1177/02670844261456039
BibTeX
@article{Pramono2026,
author = {Pramono, Diki Dwi and Puspitasari, Poppy and Suryanto, Heru and Omar, Noor Irinah},
title = {Post-spray heat treatment of cold-sprayed coatings: A review},
journal = {Surface Engineering},
year = {2026},
volume = {42},
number = {6},
pages = {605--621},
doi = {10.1177/02670844261456039}
}
EUVIMED