Substrate-dependent porous Pt coating morphology under oblique-angle sputtering
Surface Engineering · 2026-06 · 42 (6) · 656-661
DOI: 10.1177/02670844261450435 ↗Kurz gefasst
Fachartikel in der Zeitschrift Surface Engineering, online erschienen am 14.05.2026. Verfasst von Anna Honda und 2 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Gefördert von: Tatematsu Foundation, Research Foundation for the Electrotechnology of Chubu.
Abstract (Originalsprache)
Porous Pt coatings were deposited by oblique-angle sputtering (60–80°) on SiO 2 /GaN and SiO 2 /Si substrates to examine the influence of deposition angle and substrate type on coating morphology. Cross-sectional SEM revealed porous structures whose continuity depended on the underlying substrate. Films formed on SiO 2 /GaN exhibited relatively continuous porous morphologies over a wide angular range, whereas films on SiO 2 /Si showed morphological instability, including clustering, cracking, or delamination at higher deposition angles. XRD measurements indicated Pt (111) reflections, with variations in peak intensity depending on substrate and deposition angle. The observed substrate-dependent differences are discussed in relation to possible substrate-related or growth-related factors. These results provide a comparative assessment of substrate-dependent morphological stability in porous Pt coatings formed under oblique sputtering conditions.
Förderung
- Tatematsu Foundation
- Research Foundation for the Electrotechnology of Chubu
Zitieren
APA
Honda, A., Kato, T., & Honda, Y. (2026). Substrate-dependent porous Pt coating morphology under oblique-angle sputtering. Surface Engineering, 42(6), 656-661. https://doi.org/10.1177/02670844261450435
Vancouver
Honda A, Kato T, Honda Y. Substrate-dependent porous Pt coating morphology under oblique-angle sputtering. Surface Engineering. 2026;42(6):656-661. doi:10.1177/02670844261450435
BibTeX
@article{Honda2026,
author = {Honda, Anna and Kato, Takeshi and Honda, Yoshio},
title = {Substrate-dependent porous Pt coating morphology under oblique-angle sputtering},
journal = {Surface Engineering},
year = {2026},
volume = {42},
number = {6},
pages = {656--661},
doi = {10.1177/02670844261450435}
}
EUVIMED