EUVIMEDEUVIMED entdecken
Crossref

Microstructural, mechanical, and wear behavior of hydroxyapatite-based composite coatings on magnesium alloy

Sumit Kumar, Ravada Seshagiri, Renu Kumari

Surface Engineering · 2026-05 · 42 (5) · 572-581

DOI: 10.1177/02670844261450391 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Surface Engineering, online erschienen am 16.05.2026. Verfasst von Sumit Kumar und 2 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Biodegradable magnesium alloys are promising materials for temporary orthopedic implants, but their clinical performance is often compromised by poor tribological behavior. During implant insertion and post-operative micromotion, friction and fretting wear can generate debris and accelerate local material degradation, leading to premature mechanical failure. In this study, hydroxyapatite (HAp) and a ternary HAp–Al 2 O 3 –TiO 2 composite coating were deposited on Mg–1 wt% Ca alloy via electrophoretic deposition (EPD) and systematically compared to elucidate microstructure–mechanical–tribological relationships. SEM revealed a porous morphology for HAp, whereas the composite coating exhibited a denser and more uniform structure; EDS and XRD confirmed successful incorporation of Al 2 O 3 and TiO 2 into the HAp matrix. The composite coating significantly improved hardness, Young's modulus, and adhesion strength (0.39 GPa, 10.07 GPa, and 9.49 MPa) compared with HAp alone (0.23 GPa, 7.48 GPa, and 7.48 MPa). Under identical fretting conditions, the composite achieved a lower specific wear rate (1.52 × 10 −3 mm 3 /N·m) than HAp (1.74 × 10 −3 mm 3 /N·m). The novelty of this work lies in demonstrating a tribology-driven composite coating strategy for magnesium-based implants, moving beyond corrosion-focused surface modifications and directly addressing wear-related degradation relevant to in vivo mechanical loading.

Zitieren

APA

Kumar, S., Seshagiri, R., & Kumari, R. (2026). Microstructural, mechanical, and wear behavior of hydroxyapatite-based composite coatings on magnesium alloy. Surface Engineering, 42(5), 572-581. https://doi.org/10.1177/02670844261450391

Vancouver

Kumar S, Seshagiri R, Kumari R. Microstructural, mechanical, and wear behavior of hydroxyapatite-based composite coatings on magnesium alloy. Surface Engineering. 2026;42(5):572-581. doi:10.1177/02670844261450391

BibTeX
@article{Kumar2026,
  author = {Kumar, Sumit and Seshagiri, Ravada and Kumari, Renu},
  title = {Microstructural, mechanical, and wear behavior of hydroxyapatite-based composite coatings on magnesium alloy},
  journal = {Surface Engineering},
  year = {2026},
  volume = {42},
  number = {5},
  pages = {572--581},
  doi = {10.1177/02670844261450391}
}
Kostenlos starten →