EUVIMEDEUVIMED entdecken
Crossref

Laser-induced texturing of grey cast iron for enhanced tribological performance

Govind Murari, Tej Pratap

Surface Engineering · 2025-07 · 41 (7) · 851-860

DOI: 10.1177/02670844251365930 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Surface Engineering, online erschienen am 08.08.2025. Verfasst von Govind Murari und 1 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 19 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Surface texturing and its topography significantly affect the tribological performance and lifecycle of automotive components at elevated temperature, fluctuating load and speeds. Engineered surfaces using laser-induced texturing is most promising approach to address these concern by varying texture morphology, orientation and roughness. Therefore, the present study propose fabrication of seven distinct textures namely, chevron, triangles with vertex along sliding length (TAL) and width (TAW), rectangular (RT), square (ST), staggered circle (SCT), and circle (CT) by variation in texture shapes and orientation keeping constant density, pitch and depth on grey cast iron (GCI) for cylinder liner piston ring pair (CLPRs) application. Laser-induced texturing increases the areal roughness and microhardness due to variation in scanning strategy and grain refinement. Lowest COF is observed for moderate load of 80N and sliding velocity of 0.2 m/s. RT shows highest reduction in frictional coefficients (COF) and friction force (FF) of around 26.6% compared to base due to least bulge and stabilized film thickness whereas TAL has lowest. Chevron has highest roughness, bulge height, microhardness, least mass loss and most wear prone surface. Worn morphology indicates textures were intact and wear mechanics related to topographical parameters.

Zitieren

APA

Murari, G., & Pratap, T. (2025). Laser-induced texturing of grey cast iron for enhanced tribological performance. Surface Engineering, 41(7), 851-860. https://doi.org/10.1177/02670844251365930

Vancouver

Murari G, Pratap T. Laser-induced texturing of grey cast iron for enhanced tribological performance. Surface Engineering. 2025;41(7):851-860. doi:10.1177/02670844251365930

BibTeX
@article{Murari2025,
  author = {Murari, Govind and Pratap, Tej},
  title = {Laser-induced texturing of grey cast iron for enhanced tribological performance},
  journal = {Surface Engineering},
  year = {2025},
  volume = {41},
  number = {7},
  pages = {851--860},
  doi = {10.1177/02670844251365930}
}
Kostenlos starten →