EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

In-situ CrFeCoNi medium entropy alloying coating via electrospark powder deposition

Jihui Yan, Kaiping Zhang, Norman Y Zhou, Peng Peng

Surface Engineering · 2024-06 · 40 (6) · 815-825

DOI: 10.1177/02670844241282935 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Surface Engineering, online erschienen am 14.09.2024. Verfasst von Jihui Yan und 3 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Advanced Materials Joining (CAMJ), Department of Mechanical and Mechatronics Engineering, University of Waterloo, 200 University Ave W, Wa…. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Canada Research Chairs, Natural Sciences and Engineering Research Council of Canada.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Medium or high-entropy alloys have led to widespread interest in their preparation, property control, and applications. The ability to apply these new alloys as coatings on conventional materials allows alternative surface treatment methods. This study used electrospark deposition with powder feedstock, to form MEA coating with fine-tuned compositions on steel substrate. Single-phase CrFeCoNi MEA using optimized ESD parameters and powder formulation. The phase and composition of MEA coatings and their hardness were also characterized. The coating showed two orders of magnitude reduction in specific wear rate coefficient compared with that of bare A516 steel substrate. This study demonstrates that the powder-based ESD technique can be used to create in-situ M/HEA coatings for applications requiring improved properties.

Schlagwörter

Stichwörter der Autor:innen

coatingelectrospark depositionmedium/high entropy alloymicrostructurewear test

Autor:innen und Institutionen

  • Centre for Advanced Materials Joining (CAMJ), Department of Mechanical and Mechatronics Engineering, University of Waterloo, 200 University Ave W, Waterloo, Ontario, N2L 3G1, Canada.

Förderung

  • Canada Research Chairs
  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Yan, J., Zhang, K., Zhou, N. Y., & Peng, P. (2024). In-situ CrFeCoNi medium entropy alloying coating via electrospark powder deposition. Surface Engineering, 40(6), 815-825. https://doi.org/10.1177/02670844241282935

Vancouver

Yan J, Zhang K, Zhou NY, Peng P. In-situ CrFeCoNi medium entropy alloying coating via electrospark powder deposition. Surface Engineering. 2024;40(6):815-825. doi:10.1177/02670844241282935

BibTeX
@article{Yan2024,
  author = {Yan, Jihui and Zhang, Kaiping and Zhou, Norman Y and Peng, Peng},
  title = {In-situ CrFeCoNi medium entropy alloying coating via electrospark powder deposition},
  journal = {Surface Engineering},
  year = {2024},
  volume = {40},
  number = {6},
  pages = {815--825},
  doi = {10.1177/02670844241282935}
}
Kostenlos starten →