EUVIMEDEUVIMED entdecken
Crossref

The effect of different annealing temperatures on the mechanical and tribological properties of the Ti 2 AlN MAX phase films

Muhammet Cakir, Hikmet Cicek, Semih Duran, Ahmet Melik Yilmaz, Gokhan Gulten, Ihsan Efeoglu

Surface Engineering · 2024-02 · 40 (2) · 157-167

DOI: 10.1177/02670844231218221 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Surface Engineering, online erschienen am 31.01.2024. Verfasst von Muhammet Cakir und 5 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 40 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ti 2 AlN MAX phase films produced at different N 2 flow rates and different annealing temperatures were deposited on 52100 steel substrates using the closed-field unbalanced magnetron sputtering technique. N 2 flow rates were changed to 2, 3.5, and 5 sccm. Due to the increasing N 2 flow rate, film thickness decreased from 2 to 1.3 µm. Then the produced films were subjected to annealing at temperatures of 700, 750, and 800°C. After the film produced at a flow rate of 2 sccm was annealed at 750°C, the presence of the Ti 2 AlN MAX phase was determined. The binding energies of Ti 2p, Al 2p, and N 1s determined in the XPS analysis confirmed the existence of the Ti 2 AlN film. The friction coefficient measured for Ti 2 AlN MAX phase films was calculated as 0.53, the hardness value as 22.8 GPa, the elastic modulus as 291.4 GPa, and the wear rate as 2.96 × 10 −4 mm 3 /(N·m).

Zitieren

APA

Cakir, M., Cicek, H., Duran, S., Yilmaz, A. M., Gulten, G., & Efeoglu, I. (2024). The effect of different annealing temperatures on the mechanical and tribological properties of the Ti 2 AlN MAX phase films. Surface Engineering, 40(2), 157-167. https://doi.org/10.1177/02670844231218221

Vancouver

Cakir M, Cicek H, Duran S, Yilmaz AM, Gulten G, Efeoglu I. The effect of different annealing temperatures on the mechanical and tribological properties of the Ti 2 AlN MAX phase films. Surface Engineering. 2024;40(2):157-167. doi:10.1177/02670844231218221

BibTeX
@article{Cakir2024,
  author = {Cakir, Muhammet and Cicek, Hikmet and Duran, Semih and Yilmaz, Ahmet Melik and Gulten, Gokhan and Efeoglu, Ihsan},
  title = {The effect of different annealing temperatures on the mechanical and tribological properties of the Ti 2 AlN MAX phase films},
  journal = {Surface Engineering},
  year = {2024},
  volume = {40},
  number = {2},
  pages = {157--167},
  doi = {10.1177/02670844231218221}
}
Kostenlos starten →