Alloy selection for wear-resistant lightweight aluminium brake disc
Surface Engineering · 2024-02 · 40 (2) · 142-156
DOI: 10.1177/02670844231217399 ↗Kurz gefasst
Fachartikel in der Zeitschrift Surface Engineering, online erschienen am 15.01.2024. Verfasst von Suman Shrestha und 2 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 22 Literaturangaben.
Abstract (Originalsprache)
Brake discs for the rear axle of a high-performance sports car have been manufactured in three different lightweight materials; AA6082, AA7075 and AA2024 aluminium alloys. These were subsequently coated with a Keronite plasma electrolytic oxidation (PEO) ceramic layer. Full-scale dynamometer tests have been conducted against a standard low-met brake pad using a modified AK master test at increasing levels of braking temperature until a physical limit is reached. Microstructural characterisation of coating and brake pad wear and tribo-layer have been studied using SEM and EDX. In addition, post-dynamometer-test friction discs have been exposed to salt fog testing. Dynamometer tests give confidence that PEO-coated aluminium brake discs are a viable technical solution for vehicle lightweighting. In particular, compelling performance with respect to good coefficient-of-friction (CoF), extremely high coating adhesion, minimal disc and pad wear, low disc run-out, good heat dissipation, and good corrosion resistance has been demonstrated for Mat A (AA6082) alloy discs. Despite higher room temperature strength, the resulting performances of Mat B (AA7075) and Mat C (AA2024) are poor at higher braking temperatures, resulting in excessive coating spallation and subsequent grain boundary attack followed by severe intergranular corrosion.
Zitieren
APA
Shrestha, S., Francis, R., & Smith, A. (2024). Alloy selection for wear-resistant lightweight aluminium brake disc. Surface Engineering, 40(2), 142-156. https://doi.org/10.1177/02670844231217399
Vancouver
Shrestha S, Francis R, Smith A. Alloy selection for wear-resistant lightweight aluminium brake disc. Surface Engineering. 2024;40(2):142-156. doi:10.1177/02670844231217399
BibTeX
@article{Shrestha2024,
author = {Shrestha, Suman and Francis, Robin and Smith, Andrew},
title = {Alloy selection for wear-resistant lightweight aluminium brake disc},
journal = {Surface Engineering},
year = {2024},
volume = {40},
number = {2},
pages = {142--156},
doi = {10.1177/02670844231217399}
}
EUVIMED