EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Grain boundary engineering and phase structure control in CoNiAlFe shape memory alloys: Effects of deformation and heat treatment

Yaroslav Frolov, Gregory Gerstein, Sebastian Herbst, Hans Jürgen Maier

Materials Science and Technology · 11.11.2026

DOI: 10.1177/02670836261506091 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science and Technology, online erschienen am 11.11.2026. Verfasst von Yaroslav Frolov und 3 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examines phase evolution, chemical homogenization and recrystallisation in polycrystalline Co 35 Ni 35 Al 28 Fe 2 during hot rolling and annealing. Specimens were rolled at 800 or 1000°C to reductions of 50 or 75% and annealed at 800 to 1200°C. Combined BSE/EDS analysis and EBSD phase mapping identified a BCC/B2-type matrix and an FCC Co-rich γ phase. EBSD phase fractions ranged from 1.69 to 13.20% and closely matched BSE estimates. Annealing at 1000°C promoted static recovery, partial heterogeneous recrystallisation and localized grain growth. Increasing reduction from 50 to 75% changed grain size and GAM only slightly but markedly increased the FCC fraction. Annealing at 1200°C removed detectable Co-rich regions only after prior rolling, producing a homogeneous coarse-grained structure suitable for grain-boundary engineering.

Förderung

  • Deutsche Forschungsgemeinschaft

Zitieren

APA

Frolov, Y., Gerstein, G., Herbst, S., & Maier, H. J. (2026). Grain boundary engineering and phase structure control in CoNiAlFe shape memory alloys: Effects of deformation and heat treatment. Materials Science and Technology. https://doi.org/10.1177/02670836261506091

Vancouver

Frolov Y, Gerstein G, Herbst S, Maier HJ. Grain boundary engineering and phase structure control in CoNiAlFe shape memory alloys: Effects of deformation and heat treatment. Materials Science and Technology. 2026. doi:10.1177/02670836261506091

BibTeX
@article{Frolov2026,
  author = {Frolov, Yaroslav and Gerstein, Gregory and Herbst, Sebastian and Maier, Hans Jürgen},
  title = {Grain boundary engineering and phase structure control in CoNiAlFe shape memory alloys: Effects of deformation and heat treatment},
  journal = {Materials Science and Technology},
  year = {2026},
  doi = {10.1177/02670836261506091}
}
Kostenlos starten →