EUVIMEDEUVIMED entdecken
Crossref

Effect of CH 4 flow rate on the microstructure and tribological behavior of Ti/W-C/W-DLC gradient coatings on YG12 cemented carbide

Hang Wu, Xiaoqiang Liu, Chengyu Xing, Shengguo Zhou

Materials Science and Technology · 03.11.2026

DOI: 10.1177/02670836261504500 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science and Technology, online erschienen am 03.11.2026. Verfasst von Hang Wu und 3 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben. Gefördert von: Anhui Provincial Department of Education, Key Research and Development Program of Jiangxi Province, Talent Program of Tongling University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To protect WC-Co tools during machining, Ti/W-C/W-DLC compositionally graded coatings were deposited on YG12 cemented carbide via reactive magnetron sputtering. The effect of CH 4 flow rate (20–40 sccm) was systematically investigated. Results show a 30 sccm flow yields an optimized, dense sp 3 -rich amorphous structure with the lowest I D /I G ratio (0.82), suppressing W-catalyzed graphitization. This coating exhibits superior resistance to mechanical deformation and the highest interfacial adhesion (L c1 = 22 N). Furthermore, tribological tests demonstrate a low friction coefficient (∼0.09) and minimum wear rate (1.7 × 10 –7 mm 3 ·N −1 ·m −1 ). These findings elucidate hydrocarbon kinetics, providing a structural design strategy for highly wear-resistant cutting tools.

Förderung

  • Anhui Provincial Department of Education
  • Key Research and Development Program of Jiangxi Province
  • Talent Program of Tongling University

Zitieren

APA

Wu, H., Liu, X., Xing, C., & Zhou, S. (2026). Effect of CH 4 flow rate on the microstructure and tribological behavior of Ti/W-C/W-DLC gradient coatings on YG12 cemented carbide. Materials Science and Technology. https://doi.org/10.1177/02670836261504500

Vancouver

Wu H, Liu X, Xing C, Zhou S. Effect of CH 4 flow rate on the microstructure and tribological behavior of Ti/W-C/W-DLC gradient coatings on YG12 cemented carbide. Materials Science and Technology. 2026. doi:10.1177/02670836261504500

BibTeX
@article{Wu2026,
  author = {Wu, Hang and Liu, Xiaoqiang and Xing, Chengyu and Zhou, Shengguo},
  title = {Effect of CH 4 flow rate on the microstructure and tribological behavior of Ti/W-C/W-DLC gradient coatings on YG12 cemented carbide},
  journal = {Materials Science and Technology},
  year = {2026},
  doi = {10.1177/02670836261504500}
}
Kostenlos starten →