Preparation and properties of high-purity alumina foams with tunable pore structures
Materials Science and Technology · 18.07.2026
DOI: 10.1177/02670836261470314 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials Science and Technology, online erschienen am 18.07.2026. Verfasst von Yujie Zhang und 2 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben.
Abstract (Originalsprache)
This study developed high-purity alumina foams with tunable pore structures by employing a low-addition epoxy resin, appropriate foaming multiple and a modified polyethoxylated silicone (MPS). Results demonstrated that 3 times to 5 times of foaming multiples effectively control cell size (from 60–200 µm to 160–380 µm), density (from 1.12 g/cm 3 to 0.75 g/cm 3 ) and porosity (from 72.9% to 82.1%). Both the flexural strength (from 25 MPa to 10 MPa) and compressive strength (from 52 MPa to 13 MPa) of ceramic foams decreased rapidly with the increase of foaming multiples. MPS stabilizer enhanced foam stability, reducing average cell size by 37% at 60% addition. The usage amount of poly ethylene glycol diglycidyl ether is significantly reduced by 60%, which can greatly lower the material cost and the subsequent debinding cost.
Zitieren
APA
Zhang, Y., Chen, S., & Zhao, Y. (2026). Preparation and properties of high-purity alumina foams with tunable pore structures. Materials Science and Technology. https://doi.org/10.1177/02670836261470314
Vancouver
Zhang Y, Chen S, Zhao Y. Preparation and properties of high-purity alumina foams with tunable pore structures. Materials Science and Technology. 2026. doi:10.1177/02670836261470314
BibTeX
@article{Zhang2026,
author = {Zhang, Yujie and Chen, Shidong and Zhao, Yang},
title = {Preparation and properties of high-purity alumina foams with tunable pore structures},
journal = {Materials Science and Technology},
year = {2026},
doi = {10.1177/02670836261470314}
}
EUVIMED