Effect of strain rate and temperature on the compression behavior and dynamic recrystallization of AA3003-F aluminum alloy
Materials Science and Technology · 10.06.2026
DOI: 10.1177/02670836261443767 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials Science and Technology, online erschienen am 10.06.2026. Verfasst von Daniel Bedoya und 4 weiteren Autor:innen. Die Arbeit nennt 69 Literaturangaben. Gefördert von: ANRT.
Abstract (Originalsprache)
This study examined the thermomechanical response and microstructural evolution of AA3003 aluminum alloy in the as-fabricated F-temper during compression from room temperature to 550°C at strain rates ranging from 5 × 10 − 5 s − 1 to 5 × 10 − 2 s − 1 . The initially heterogeneously deformed microstructure of the F-temper alloy promoted recovery and recrystallization. For temperatures below 250°C, the flow curves exhibited moderate strain hardening followed by softening, whereas above 250°C, especially at low strain rates and near 350°C, the mechanical behavior was characterized by a stabilized flow stress and marked strain-rate sensitivity. Electron backscatter diffraction (EBSD) revealed that continuous dynamic recrystallization (CDRX), i.e., progressive subgrain rotation and boundary-misorientation increase leading to new grains, dominated at high strain rates, whereas a transition toward concurrent CDRX and discontinuous dynamic recrystallization (DDRX), i.e., nucleation and growth of new strain-free grains, occurred at lower strain rates, with an estimated transition Zener–Hollomon value around Z ≈ 2 . 92 × 10 9 s − 1 . These findings provided valuable insight into the interplay between deformation parameters, dynamic softening mechanisms, and microstructural refinement in AA3003-F.
Förderung
- ANRT
Zitieren
APA
Bedoya, D., Serri, J., Mazet, T., Bergin, G., & Fleury, E. (2026). Effect of strain rate and temperature on the compression behavior and dynamic recrystallization of AA3003-F aluminum alloy. Materials Science and Technology. https://doi.org/10.1177/02670836261443767
Vancouver
Bedoya D, Serri J, Mazet T, Bergin G, Fleury E. Effect of strain rate and temperature on the compression behavior and dynamic recrystallization of AA3003-F aluminum alloy. Materials Science and Technology. 2026. doi:10.1177/02670836261443767
BibTeX
@article{Bedoya2026,
author = {Bedoya, Daniel and Serri, Jérôme and Mazet, Thierry and Bergin, Gaëtan and Fleury, Eric},
title = {Effect of strain rate and temperature on the compression behavior and dynamic recrystallization of AA3003-F aluminum alloy},
journal = {Materials Science and Technology},
year = {2026},
doi = {10.1177/02670836261443767}
}
EUVIMED