EUVIMEDEUVIMED entdecken
Crossref

Microstructure and mechanical properties of fe-19Cr-10Ni-1Mn austenitic stainless steel after hot stamping

Chang Liu, Hongbang Shao, Yuanchun Huang, Zhengbing Xiao, Yu Liu, Zhangxi Wu

Materials Science and Technology · 01.04.2026

DOI: 10.1177/02670836261432233 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science and Technology, online erschienen am 01.04.2026. Verfasst von Chang Liu und 5 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben. Gefördert von: National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To investigate the heterogeneity induced by hot stamping deformation, the microstructure and mechanical properties of Fe-19Cr-10Ni-1Mn austenitic stainless steel were characterized at different locations of the formed curved part. The grain misorientation angle distribution, texture evolution and grain boundaries character distributions at typical positions were investigated. Microstructure analysis demonstrates pronounced inhomogeneity in both grain structure and microtexture evolution across distinct deformation zones of the component, and a limited amount of martensitic transformation was induced in specific locations due to the large strain and subsequent rapid cooling. The combined analysis of stress-strain curves and microstructure reveals that the properties primarily depend on the uniform grain structure and high fraction of Σ3 twin boundaries, with minor contributions from dislocations and martensitic transformation.

Förderung

  • National Key Research and Development Program of China

Zitieren

APA

Liu, C., Shao, H., Huang, Y., Xiao, Z., Liu, Y., & Wu, Z. (2026). Microstructure and mechanical properties of fe-19Cr-10Ni-1Mn austenitic stainless steel after hot stamping. Materials Science and Technology. https://doi.org/10.1177/02670836261432233

Vancouver

Liu C, Shao H, Huang Y, Xiao Z, Liu Y, Wu Z. Microstructure and mechanical properties of fe-19Cr-10Ni-1Mn austenitic stainless steel after hot stamping. Materials Science and Technology. 2026. doi:10.1177/02670836261432233

BibTeX
@article{Liu2026,
  author = {Liu, Chang and Shao, Hongbang and Huang, Yuanchun and Xiao, Zhengbing and Liu, Yu and Wu, Zhangxi},
  title = {Microstructure and mechanical properties of fe-19Cr-10Ni-1Mn austenitic stainless steel after hot stamping},
  journal = {Materials Science and Technology},
  year = {2026},
  doi = {10.1177/02670836261432233}
}
Kostenlos starten →